Results 1 to 5 of 5
  1. #1

    Is this 02 1200 xlt repairable? I'd like too purchase it.

    pictures of the damage it looks kind of like some dock damage I was unsure if that lower piece was replaceable or not? I assume I have to get all new decals and re fiber glass the rear end.


  2. #2

  3. #3
    Is this a part of the hull or just a piece of plastic?

  4. #4
    quadzilla's Avatar
    Join Date
    Apr 2007
    Location
    LOCH NESS Monster-Land
    Posts
    1,178
    +1
    29
    Quote Originally Posted by iLL240 View Post
    pictures of the damage it looks kind of like some dock damage I was unsure if that lower piece was replaceable or not? I assume I have to get all new decals and re fiber glass the rear end.
    Hey there, firstly welcome to the forum..

    From the picture I'd confidently say yes that damage is repairable.
    - Seems fairly minor and localized in the rear area.?

    Ideally post some more detailed images.
    - As much as the damage may concern you. make sure you perform a compression check on the motor.!
    - Also be sure to find out if the carbs have been rebuilt in the last season or two.?
    - How many hours are on the ski.? any modifications or after market parts been fitted.?

    Don't just jump in without knowing all the details..

  5. #5
    http://m.imgur.com/vszW7iq that's the damage I was worried about was that lower piece on the front plastic? It has 100 hours I haven't done a compression check yet but I will if it gets that far I'm not sure if it has a rebuild I could do the carbs I'm also looking at a 99 with 140 hours but it only has 110 compression but looks much cleaner. I'm mechanically competent so I can do a rebuild

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 02 and 03 1200 XLT's needing repair (sell as is?)
    By t500hps in forum Yamaha PWC Performance (2-stroke)
    Replies: 5
    Last Post: 08-17-2016, 08:38 PM
  2. What is this connector called, where do I find a mate for it?
    By K447 in forum Polaris Open Discussion
    Replies: 16
    Last Post: 07-08-2014, 09:11 AM
  3. 02 STXR 1200, Is this normal?
    By stxr in forum Kawasaki Open Discussion
    Replies: 2
    Last Post: 11-10-2010, 08:27 AM
  4. is there a govener on the 1200 xlt
    By jeff mariani in forum Yamaha PWC Performance (2-stroke)
    Replies: 13
    Last Post: 08-01-2008, 06:10 PM
  5. Is this repairable??
    By bamafutbal in forum Sea Doo Open Discussion
    Replies: 4
    Last Post: 06-13-2007, 10:26 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •