04-08-2014, 12:28 PM #1
Ultra 250/260/300 Update for Ultra 310 Exhaust Filter Retaining pin by Nicjak
Quote from Nicjak HERE
Well my ski has clocked 60hrs but the last few hrs it has had a hesitant start whilst on the water, yep a sure sign filter is gone. Who ever says running without the filter does not effect starting on the water is full of sh it, it does I dont care what your excuse is.. as my filter was completely gone and I had no rpm loss I needed to be sure it was gone, well guess what as pictured I had to cut the waterbox in half to remove it. Only a few weeks back a guy I helped had exactly the same problem. Wonder how many of these are going to show up to the unwary.
Well talk about easy fix took all of about 15min. Remove seats and base, remove and lower bypass valve and catchcan. Place rag in to catch shards. Drill upto 11.5mm, tap thread too 1/4" BSPT 19tpi. Insert pin and tighten
All done no more jammed filter worries.
08-30-2015, 07:42 AM #2
08-30-2015, 05:21 PM #3
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By Vagaondracing103 in forum Kawasaki ClassifiedsReplies: 0Last Post: 03-28-2012, 04:27 PM
By Green Hulk in forum Kawasaki PWC Performance (4-stroke)Replies: 1Last Post: 11-22-2011, 05:32 PM
By moyer313 in forum Kawasaki ClassifiedsReplies: 3Last Post: 09-19-2011, 07:26 PM
By Red08Ultra250 in forum Kawasaki ClassifiedsReplies: 0Last Post: 05-26-2011, 06:01 PM
By Red08Ultra250 in forum Kawasaki PWC Performance (4-stroke)Replies: 8Last Post: 05-26-2011, 04:54 PM