Page 1 of 2 1 2 LastLast
Results 1 to 10 of 18
  1. #1

    Added 15gal of fuel storage to my trailer

    I wanted to add some fuel storage to my double trailer so here is what I came up with.

    5 gallon race jugs with 3 spot lockable mount.

    I'm still waiting on an undamaged tongue box to arrive...







  2. #2
    Awesome looking addition. I've been thinking about doing something similar. Did you build that setup or buy it? If bought, where from?

  3. #3
    liquid chicken's Avatar
    Join Date
    Sep 2013
    Location
    Hutto TX
    Posts
    1,307
    +1
    84
    very nice! i want to have the same on my trailer but sadly when i bought the ski it came with the icatch so i have no room. i have no fabrication skills to figure out how to add a single one to each side at an angle.

  4. #4
    Quote Originally Posted by crapbrains View Post
    Awesome looking addition. I've been thinking about doing something similar. Did you build that setup or buy it? If bought, where from?

    The Jug Holder
    http://www.amazon.com/gp/product/B00...?ie=UTF8&psc=1

    The 5 Gallon Jugs (you will need to buy the hose nozzles as well)
    http://www.amazon.com/gp/product/B00...?ie=UTF8&psc=1

    The Title of the item is Black but the description says its blue, I emailed them to assure they sent black jugs. But they come in all types of colors, Black, Blue, White etc.
    Last edited by Copper&Black; 04-10-2014 at 04:16 PM.

  5. #5
    Q in Arizona's Avatar
    Join Date
    May 2013
    Location
    Phoenix, Az
    Posts
    30,473
    +1
    7,332
    Quote Originally Posted by liquid chicken View Post
    very nice! i want to have the same on my trailer but sadly when i bought the ski it came with the icatch so i have no room. i have no fabrication skills to figure out how to add a single one to each side at an angle.
    If I can do it I know you can. Not sure if you could do one like this but I did mine at an angle on the A frame of the tongue piece. I just used a $9 plastic storage box from Walmart and got 3 U brackets from the hardware store and used a drill to cut the needed holes and use a rubber tie down strap to hold the gas can. If I had another gas can like that one I could fit 2.

    Click image for larger version. 

Name:	20140410_093017.jpg 
Views:	244 
Size:	41.2 KB 
ID:	326491Click image for larger version. 

Name:	20140410_092919.jpg 
Views:	189 
Size:	83.0 KB 
ID:	326492Click image for larger version. 

Name:	20140410_092934.jpg 
Views:	164 
Size:	59.6 KB 
ID:	326493Click image for larger version. 

Name:	20140410_092940.jpg 
Views:	150 
Size:	79.0 KB 
ID:	326494Click image for larger version. 

Name:	20140410_092946.jpg 
Views:	149 
Size:	47.4 KB 
ID:	326495

  6. #6
    Q in Arizona's Avatar
    Join Date
    May 2013
    Location
    Phoenix, Az
    Posts
    30,473
    +1
    7,332
    Quote Originally Posted by Copper&Black View Post
    I wanted to add some fuel storage to my double trailer so here is what I came up with.

    5 gallon race jugs with 3 spot lockable mount.

    I'm still waiting on an undamaged tongue box to arrive...





    That looks slick as hell with everything all black.

  7. #7
    Q in Arizona's Avatar
    Join Date
    May 2013
    Location
    Phoenix, Az
    Posts
    30,473
    +1
    7,332
    I also have a metal box that could mount at an angle the same way as the plastic box and it has a built in lockable gas can holder...I just don't think I will ever mount it and use it. A shame...it's brand new.
    Click image for larger version. 

Name:	20140410_093954.jpg 
Views:	117 
Size:	30.8 KB 
ID:	326498Click image for larger version. 

Name:	20140410_093917.jpg 
Views:	112 
Size:	48.1 KB 
ID:	326497

  8. #8
    liquid chicken's Avatar
    Join Date
    Sep 2013
    Location
    Hutto TX
    Posts
    1,307
    +1
    84
    Quote Originally Posted by Q in Arizona View Post
    Quote Originally Posted by liquid chicken View Post
    very nice! i want to have the same on my trailer but sadly when i bought the ski it came with the icatch so i have no room. i have no fabrication skills to figure out how to add a single one to each side at an angle.
    If I can do it I know you can. Not sure if you could do one like this but I did mine at an angle on the A frame of the tongue piece. I just used a $9 plastic storage box from Walmart and got 3 U brackets from the hardware store and used a drill to cut the needed holes and use a rubber tie down strap to hold the gas can. If I had another gas can like that one I could fit 2.

    Click image for larger version. 

Name:	20140410_093017.jpg 
Views:	244 
Size:	41.2 KB 
ID:	326491Click image for larger version. 

Name:	20140410_092919.jpg 
Views:	189 
Size:	83.0 KB 
ID:	326492Click image for larger version. 

Name:	20140410_092934.jpg 
Views:	164 
Size:	59.6 KB 
ID:	326493Click image for larger version. 

Name:	20140410_092940.jpg 
Views:	150 
Size:	79.0 KB 
ID:	326494Click image for larger version. 

Name:	20140410_092946.jpg 
Views:	149 
Size:	47.4 KB 
ID:	326495

    i will have to get some pics under the walk pad and see what we can come up with. it and it did not come with a wheel jack in the front so i added one and that took most of the space there.

    my thought was since its round pipe that the trailer is made of what would need to be done to have a strong enough arm coming off near the front of the ski that would either stay angled or go to a flat surface where the gas can would be.

    or something that butts up against the icontrol lock.. just thinking out loud...


    edit: http://partsfinder.onlinemicrofiche....CTRICAL-SYSTEM

    that shows the tube part.. and up front where washer for #1 is that is where i was thinking an arm could come up underneath the walk pad and either stay angled or to a flat cage that would hold a single 5gal can.

  9. #9
    Q in Arizona's Avatar
    Join Date
    May 2013
    Location
    Phoenix, Az
    Posts
    30,473
    +1
    7,332
    Quote Originally Posted by liquid chicken View Post
    Quote Originally Posted by Q in Arizona View Post
    Quote Originally Posted by liquid chicken View Post
    very nice! i want to have the same on my trailer but sadly when i bought the ski it came with the icatch so i have no room. i have no fabrication skills to figure out how to add a single one to each side at an angle.
    If I can do it I know you can. Not sure if you could do one like this but I did mine at an angle on the A frame of the tongue piece. I just used a $9 plastic storage box from Walmart and got 3 U brackets from the hardware store and used a drill to cut the needed holes and use a rubber tie down strap to hold the gas can. If I had another gas can like that one I could fit 2.

    Click image for larger version. 

Name:	20140410_093017.jpg 
Views:	244 
Size:	41.2 KB 
ID:	326491Click image for larger version. 

Name:	20140410_092919.jpg 
Views:	189 
Size:	83.0 KB 
ID:	326492Click image for larger version. 

Name:	20140410_092934.jpg 
Views:	164 
Size:	59.6 KB 
ID:	326493Click image for larger version. 

Name:	20140410_092940.jpg 
Views:	150 
Size:	79.0 KB 
ID:	326494Click image for larger version. 

Name:	20140410_092946.jpg 
Views:	149 
Size:	47.4 KB 
ID:	326495

    i will have to get some pics under the walk pad and see what we can come up with. it and it did not come with a wheel jack in the front so i added one and that took most of the space there.

    my thought was since its round pipe that the trailer is made of what would need to be done to have a strong enough arm coming off near the front of the ski that would either stay angled or go to a flat surface where the gas can would be.

    or something that butts up against the icontrol lock.. just thinking out loud...


    edit: http://partsfinder.onlinemicrofiche....CTRICAL-SYSTEM

    that shows the tube part.. and up front where washer for #1 is that is where i was thinking an arm could come up underneath the walk pad and either stay angled or to a flat cage that would hold a single 5gal can.
    Ooooh yeah...the walkpad on the icatch trailers...that and the tubular frame...and not having the A frame tongue....that kinda changes everything. How about right on the walkpad?

  10. #10
    liquid chicken's Avatar
    Join Date
    Sep 2013
    Location
    Hutto TX
    Posts
    1,307
    +1
    84
    Quote Originally Posted by Q in Arizona View Post
    Ooooh yeah...the walkpad on the icatch trailers...that and the tubular frame...and not having the A frame tongue....that kinda changes everything.
    true but it can be done. if i still had my truck id say who cares and load gas cans in the back like i used to. now with a jeep compass i dont want them enclosed in the vehicle.

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Just added the fzr seat bracket to my white svho
    By d00m in forum Yamaha PWC Performance (4-stroke)
    Replies: 16
    Last Post: 03-20-2015, 12:06 PM
  2. Replies: 9
    Last Post: 03-29-2012, 08:30 AM
  3. Can I add on an external fuel pump to my Hurricane?
    By Timberalan in forum Polaris Open Discussion
    Replies: 9
    Last Post: 03-08-2012, 10:35 PM
  4. Ideas on what I need to secure a winch to my trailer
    By Jasonsandiego in forum Towing and Trailers
    Replies: 4
    Last Post: 07-03-2011, 10:39 PM
  5. I added a 2.5 wedge to my 4 rxp what can i expect?
    By sea-one in forum 4-Tec Performance
    Replies: 23
    Last Post: 05-05-2011, 01:48 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •