Thread: 2004 FX HO Bilge Pump Question
04-19-2014, 12:46 AM #1
- Join Date
- May 2013
2004 FX HO Bilge Pump Question
I have two Yamaha FX HO's, and I just changed out the Batteries. I noticed that one of the skis bilge pump is not activating or running for 30 sec after shut down. I checked the pump and it is spinning freely, the connection plug is tight and clean and I have continuity at the plug going to the pump. Can somone please direct me to the most obvious place to start to look, fuses etc. I'm guessing I will need to access the big black rectangular compartment were it seems most of the electrical is contained. I have no problem disasembling the whole entire ski if need be, just trying to make this as painless as possible. Thanks for any help.
ps, I will apply power and test the pump before I do anything else, it just got dark on me here in S Fl. I did check those three fuses behind the round screw cap, what are those anyways? Thanks.
Update: The pump is bad, so going to replace it.
Second Update: $24.99 at Boat Owners Warehouse and an hours labor and it's done.
Last edited by krugger3; 04-19-2014 at 11:54 AM.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By skoepp in forum 4-Tec PerformanceReplies: 9Last Post: 09-09-2008, 11:13 AM
By LS2000 Cop in forum Yamaha PWC Performance (2-stroke)Replies: 1Last Post: 04-08-2008, 08:38 PM
By tryintolearn in forum Polaris How To & FAQsReplies: 4Last Post: 07-18-2007, 10:54 AM
By smittyj77 in forum Polaris Open DiscussionReplies: 6Last Post: 05-29-2007, 12:47 AM
By Piney in forum Sea Doo Open DiscussionReplies: 20Last Post: 03-18-2006, 09:33 AM