Results 1 to 5 of 5
  1. #1

    help with installing oil block off kit

    i'm installing an oil block off kit on a pro 785 and have no idea what the rubber plugs are for. would someone please help me out.


  2. #2
    ph2ocraft's Avatar
    Join Date
    Apr 2006
    Location
    Campbell, Ca.
    Posts
    14,100
    +1
    105
    josh, you are eliminating the oil injection system so when you pull the injector lines off, those rubber plugs are used to cover the oil line nipples at the carbs.
    They prevent the carbs from sucking air without going through the flame arrestors.
    Last edited by ph2ocraft; 03-26-2007 at 10:50 PM.

  3. #3
    Does anyone know if there is any articles on how to install one of these oil block off kits on a 98 Polaris SLTX 1050? Or will SBT provide this information if I buy it from them?

    Thanks!

  4. #4
    ph2ocraft's Avatar
    Join Date
    Apr 2006
    Location
    Campbell, Ca.
    Posts
    14,100
    +1
    105
    Call them, I'm not sure any directions are needed as it's just a flat plate with 2 screws holding it to the front of the engine. Then a few plugs to cap off the nipples where the oil lines attach to the carbs.
    As I recall they have a minimum order or shipping fee, you might want to check with guys like

    Watcon.com
    AtlanticPowersports.com
    Jetskimechanic.com
    Hotseatperformance.com
    Parkeryamaha.com
    Last edited by ph2ocraft; 03-28-2007 at 08:24 AM.

  5. #5

    Join Date
    Sep 2006
    Location
    topeka,ks
    Posts
    3,332
    ya see if they have a gasket for it also just 2 be on the safe side ,

    i was thinking about removeing the oil injection is it prone 2 fail ?


    be sure 2 reed the article on how to tune your carbs after you remove the injection

    the lowest thing you can buy is 30 bucks so might wanna throw a top end gasket kits or some kinda o ring or something so you meet the limit

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Please help with gp1300 oil block off
    By amf133 in forum Yamaha PWC Performance (2-stroke)
    Replies: 4
    Last Post: 05-28-2010, 10:16 PM
  2. oil block off kit
    By portalpanthers in forum Polaris PWC Performance
    Replies: 4
    Last Post: 01-28-2009, 06:33 PM
  3. FS: 2new 1200r oil block off kits. $20Shipped
    By Water4fire in forum Yamaha Classifieds
    Replies: 7
    Last Post: 11-14-2008, 10:54 AM
  4. Oil block off kit
    By thor1747 in forum Polaris Open Discussion
    Replies: 2
    Last Post: 08-24-2008, 04:08 AM
  5. Help for install thermo block off
    By repsol in forum 4-Tec Performance
    Replies: 0
    Last Post: 07-10-2008, 09:20 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •