Results 1 to 5 of 5
  1. #1

    Join Date
    Jan 2006
    Location
    Ft. Walton Bch
    Posts
    92
    +1
    2

    Question Has anyone put cruz control on a FZR/FZS

    Hi,

    I was wondering if anyone has installed, attempted to install, or researched the possibility of installing cruz on an FZR? I realize you'll need the switch off a standard SHO, but was wondering about weather or not the FZR harness (with mods) might work and/or weather the FZR ECU had a cruz function that could be turned on.


    thanks


  2. #2
    64physhy's Avatar
    Join Date
    Aug 2010
    Location
    Weatherford, TX
    Posts
    1,725
    +1
    168
    You would probably need the entire wiring harness from an FX SHO. You definitely need the ECU and switches.

  3. #3

    Join Date
    Mar 2014
    Location
    Siesta Key, Fl
    Posts
    1,066
    +1
    155
    Once I get the Motec (Hoping to order before I fly out Tuesday) I plan on sourcing the controls and wiring it in since the ECU supports it. I am hoping I can just add the missing couple wires to the setup and not have to replace the harness. I mostly want it for the wake mode, as we have lots of them here for the Manatees so it will make long trips a lot more comfortable.

  4. #4

    Join Date
    Jan 2006
    Location
    Ft. Walton Bch
    Posts
    92
    +1
    2
    Quote Originally Posted by SilentShooter View Post
    Once I get the Motec (Hoping to order before I fly out Tuesday) I plan on sourcing the controls and wiring it in since the ECU supports it. I am hoping I can just add the missing couple wires to the setup and not have to replace the harness. I mostly want it for the wake mode, as we have lots of them here for the Manatees so it will make long trips a lot more comfortable.
    Roger that I'm in the same situation here... If i understand correctly The motec will work, the OEM FZR ecu will notwork, but OEM FX SHO ECU then add wiring....

  5. #5
    YAMAHA POWAAAA !!!!! 1_Fast_SHO's Avatar
    Join Date
    Apr 2010
    Location
    Houston, Texas
    Posts
    3,143
    +1
    255
    Quote Originally Posted by mjet View Post
    Hi,

    I was wondering if anyone has installed, attempted to install, or researched the possibility of installing cruz on an FZR? I realize you'll need the switch off a standard SHO, but was wondering about weather or not the FZR harness (with mods) might work and/or weather the FZR ECU had a cruz function that could be turned on.


    thanks
    I have a wiring harness for an FX SHO,

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. has anyone put a trim system on a F15X?????
    By Derek45 in forum Honda Open Discussion
    Replies: 4
    Last Post: 07-08-2014, 06:51 PM
  2. has anyone installed a bov on fzr
    By jusloungin in forum Yamaha PWC Performance (4-stroke)
    Replies: 48
    Last Post: 03-17-2010, 09:33 PM
  3. Has anyone put the RXT(X) on a closed course
    By T5Racing in forum 4-Tec Performance
    Replies: 8
    Last Post: 04-09-2009, 03:38 PM
  4. Has anyone put a 4tec engine on XLT1200?
    By GeoRXT in forum 4-Tec Performance
    Replies: 25
    Last Post: 12-20-2008, 03:11 PM
  5. Has anyone tried TDR waterbox on RXP
    By codymouse54321 in forum 4-Tec Performance
    Replies: 8
    Last Post: 07-05-2007, 11:00 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •