Page 1 of 23 1 2 3 11 ... LastLast
Results 1 to 10 of 221
  1. #1
    GRF + DashPac:) seadoo02xp's Avatar
    Join Date
    Apr 2005
    Location
    MO
    Posts
    4,559
    +1
    948

    Rxpx260 turbo :)

    After being plagued with problems last season I took a different approach over the winter with this build. It's more of a "stock" turbo setup on my 2012 Rxpx . This is a run with 17.5 psi running 93 octane pump gas. Pump reliefs are not being used and it is safe to 86 mph so far with no stuffing. The turbo is using a water box and the stock exhaust outlet. This run was done at mudbug a few days ago.




  2. #2
    Sayers's Avatar
    Join Date
    Jul 2010
    Location
    Melbourne AUS
    Posts
    2,300
    +1
    134
    Quote Originally Posted by seadoo02xp View Post
    After being plagued with problems last season I took a different approach over the winter with this build. It's more of a "stock" turbo setup on my 2012 Rxpx . This is a run with 17.5 psi running 93 octane pump gas. Pump reliefs are not being used and it is safe to 86 mph so far with no stuffing. The turbo is using a water box and the stock exhaust outlet. This run was done at mudbug a few days ago.



    Nice work. Let's see some pics of the turbo and Waterbox setup.

  3. #3
    ride it like you stole it!!! raceneked's Avatar
    Join Date
    Sep 2011
    Location
    Lake Havasu, AZ
    Posts
    3,021
    +1
    840
    who's flash is in the ECU?? or is it a MoTEC?

  4. #4
    GRF + DashPac:) seadoo02xp's Avatar
    Join Date
    Apr 2005
    Location
    MO
    Posts
    4,559
    +1
    948
    Motec m130. I'll get some more pics up later on.

  5. #5
    Sayers's Avatar
    Join Date
    Jul 2010
    Location
    Melbourne AUS
    Posts
    2,300
    +1
    134
    What type of Waterbox is it? Do you think it will hold up with the turbo setup.

  6. #6
    GRF + DashPac:) seadoo02xp's Avatar
    Join Date
    Apr 2005
    Location
    MO
    Posts
    4,559
    +1
    948
    Quote Originally Posted by Sayers View Post
    What type of Waterbox is it? Do you think it will hold up with the turbo setup.
    It's a old jpipe waterbox with a 3.5" Inlet welded onto it. So far so good. It has held up for over 10 hours of use. It's funny because the inlet is larger than the outlet. I used the stock size outlet to run through the stock exhaust outlet in the tunnel. Turbo lag was not effected by this either versus a straight pipe. It's much more rec friendly this way. If I was guessing I would say the waterbox may not hold up to 25 psi but I'll never test that. I'll get a few more pics later on if anyone is interested .

  7. #7
    What turbo are you running

  8. #8
    GRF + DashPac:) seadoo02xp's Avatar
    Join Date
    Apr 2005
    Location
    MO
    Posts
    4,559
    +1
    948

    Rxpx260 turbo :)

    Quote Originally Posted by DR2006RXP View Post
    What turbo are you running
    Borg Warner efr 6758
    It was part of the shark kit that used to be sold but has different up pipe and down pipe currently .

  9. #9
    Is that bigger or smaller than a gt3076r

  10. #10
    It's a fact when you keep it simple you get many hours of trouble free fun, I did over 30 hours of turbo fun at 15 psi

Page 1 of 23 1 2 3 11 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Twin Turbo's Anyone???
    By Water4fire in forum Sea Doo Open Discussion
    Replies: 8
    Last Post: 08-01-2007, 08:03 PM
  2. Intercoolers - Rotax Racing v. Turbo Tech
    By Jarrett in forum 4-Tec Performance
    Replies: 35
    Last Post: 04-18-2007, 08:31 PM
  3. Interesting pic *Turbo 15F*
    By Green Hulk in forum Sea Doo Open Discussion
    Replies: 58
    Last Post: 11-18-2005, 05:11 PM
  4. Question People Running Attwood Turbo Blowers
    By 1FastTrespiper in forum 4-Tec Performance
    Replies: 40
    Last Post: 08-17-2005, 10:40 AM
  5. Intercooler from Turbo Tech
    By Compwhiz82 in forum 4-Tec Performance
    Replies: 7
    Last Post: 06-18-2005, 12:04 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •