05-06-2014, 08:58 AM #1
Single wire GP1300R throttle cable
The fuel injected gp1300r has two throttle cables , one goes to the throttle bodies and the second one goes to the oil pump . Seeing as how I have removed the oil pump , is there any way of removing the second wire ? I feel the oem wire splitter is kind of bulky and an accident waiting to happen .
I've ordered a 1200 gpr throttle cable which is part number #66V-67252-00-00 . Does anybody know if it will fit ?
05-06-2014, 09:03 AM #2
That i cant tell you but you can take the oil pump cable off in that center connection. Im using an xlt800 cable for my efi conversion in my xlt, the gpr cable was too short. So i know the xlt 800 cable is long enough. Its a single cable. I can measure the length for you today
05-06-2014, 09:19 AM #3
Thank you very much . Your help is appreciated .
05-06-2014, 09:56 AM #4
05-06-2014, 01:24 PM #5
There are (3) cables - remove the one from where they split into 2 going to the pump
05-07-2014, 11:02 PM #6
^^^ this... the 1200 cable will not work.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By crashhard in forum Yamaha ClassifiedsReplies: 1Last Post: 10-01-2013, 02:09 AM
By Nathypoo in forum Yamaha PWC Performance (2-stroke)Replies: 3Last Post: 09-23-2012, 05:48 PM
By smitch in forum Yamaha ClassifiedsReplies: 2Last Post: 05-28-2012, 10:51 AM
By treemoney in forum Yamaha ClassifiedsReplies: 9Last Post: 09-16-2009, 06:40 AM
By javajoe in forum Yamaha ClassifiedsReplies: 6Last Post: 08-29-2009, 07:59 PM