Page 1 of 2 1 2 LastLast
Results 1 to 10 of 17
  1. #1
    Take the time to smile sirbreaksalot's Avatar
    Join Date
    Jun 2007
    Location
    Brisvegas
    Posts
    4,157
    +1
    598

    310 factory speed delimiter removed..............



    This is my 2014 310SE ultra with the factory speed delimiter removed !

    I have converted the ski back to 100% stock including intrusion water plate etc

    this was one of the runs on a not so perfect water with FULL fuel , sitting on the seat but still able to do an easy 72mph straight up.

    as you can see and hear the 7600 factory 68mph delimiter is GONESKI

    next step is to remove or reduce the traction control/rev limiter that the late model skis have

    next week or so I will get out with the programming guy and get to rough water to confirm its gone...........


    but I am happy with the RPM's considering ZERO modification are on the ski other than the re-flash, as I know with correct mods I will be were I want to be again

    and this reflash is ONLY for delimiter ( scom )

    no other maps have been altered in this testing !!!!!!

    will report back once more progress is made.

    Waz
    Last edited by sirbreaksalot; 05-10-2014 at 01:05 AM.


  2. #2
    "just sayin".. jetdave56's Avatar
    Join Date
    Nov 2008
    Location
    JERSEY SHORE
    Posts
    4,496
    +1
    619
    You were hitting 7850-7900 on all stock in first vid ,were they spike readings?

  3. #3
    Take the time to smile sirbreaksalot's Avatar
    Join Date
    Jun 2007
    Location
    Brisvegas
    Posts
    4,157
    +1
    598
    yes they not a consistant RPM's

    as soon a the limiter kicks in like the 300x it pulls it back down to 7650 ish

    as now it will hold 8000 which is a gain 400 ish rpm constantly..........

    I just noticed that the 1st vid wasnt stock because the speedo is 53mph max ........thats with a rd plate that

    I will remove the 1st vid and go find a total stock vid so it doesnt confuse people
    Last edited by sirbreaksalot; 05-10-2014 at 06:59 PM.

  4. #4
    Waz, sounds like you are not going to wait for the new ECU from KAW? When it comes, and I think it will be here soon, will you have to start from scratch with regards to what you are doing now? JB

  5. #5
    Take the time to smile sirbreaksalot's Avatar
    Join Date
    Jun 2007
    Location
    Brisvegas
    Posts
    4,157
    +1
    598
    this is just some testing for a aussie company JB

    i just like options

    but I do still want the part you speak of
    Last edited by sirbreaksalot; 05-10-2014 at 07:00 PM.

  6. #6
    ANTONYUK's Avatar
    Join Date
    Oct 2007
    Location
    Russia, Vladivostok
    Posts
    264
    +1
    46
    When will start selling SCOM for 310?

  7. #7
    Site Admin Green Hulk's Avatar
    Join Date
    Apr 2005
    Location
    Morgan City, LA
    Posts
    36,398
    +1
    2,524
    Quote Originally Posted by ANTONYUK View Post
    When will start selling SCOM for 310?
    anton, starting today

    http://www.4-tecperformance.com/inde...oducts_id=2569

  8. #8
    ANTONYUK's Avatar
    Join Date
    Oct 2007
    Location
    Russia, Vladivostok
    Posts
    264
    +1
    46
    Quote Originally Posted by Green Hulk View Post
    Quote Originally Posted by ANTONYUK View Post
    When will start selling SCOM for 310?
    anton, starting today

    http://www.4-tecperformance.com/inde...oducts_id=2569
    in stock now?

  9. #9
    ANTONYUK's Avatar
    Join Date
    Oct 2007
    Location
    Russia, Vladivostok
    Posts
    264
    +1
    46
    Quote Originally Posted by Green Hulk View Post
    Quote Originally Posted by ANTONYUK View Post
    When will start selling SCOM for 310?
    anton, starting today

    http://www.4-tecperformance.com/inde...oducts_id=2569
    I need 3 units if available

  10. #10
    Site Admin Green Hulk's Avatar
    Join Date
    Apr 2005
    Location
    Morgan City, LA
    Posts
    36,398
    +1
    2,524
    Quote Originally Posted by ANTONYUK View Post
    Quote Originally Posted by Green Hulk View Post
    Quote Originally Posted by ANTONYUK View Post
    When will start selling SCOM for 310?
    anton, starting today

    http://www.4-tecperformance.com/inde...oducts_id=2569
    I need 3 units if available

    Anton, they will begin shipping in about 10 days

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Taking off speed delimiter for 2012 Fzr?
    By Berlinger86 in forum Yamaha PWC Performance (4-stroke)
    Replies: 4
    Last Post: 05-26-2014, 04:03 PM
  2. Factory Air box removal??
    By LCM_99 in forum Sea Doo How To & FAQs
    Replies: 0
    Last Post: 08-12-2013, 12:59 PM
  3. How far off is the factory speed display? (stock 06 GPR)
    By smbstyle in forum Yamaha PWC Performance (2-stroke)
    Replies: 9
    Last Post: 07-26-2009, 07:32 PM
  4. best way to remove factory stickers
    By txgp1300r in forum Yamaha PWC Performance (2-stroke)
    Replies: 18
    Last Post: 07-07-2007, 04:03 PM
  5. Low speed screw removal
    By swamped in forum Yamaha PWC Performance (2-stroke)
    Replies: 1
    Last Post: 08-24-2006, 09:16 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •