Results 1 to 10 of 10
  1. #1
    SeaLion's Avatar
    Join Date
    Aug 2006
    Location
    Ride Mohave To Havasu. Live In Los Angeles.
    Posts
    841

    OzVirage Back On The Water

    I offered this up in the original thread here that got accidentally deleted. I have some brand new TDR carbon fiber reeds for the domestic 900. If these also fit the 1200 and OZ's new reeds got damaged and need replacement, I can offer these up? Can anyone verify if the 900 reeds are the same as the 1200? If anyone else has spare parts that might be of use to Oz, please post it here. Let's try to get him back on the water as best as we can. Sound good?


  2. #2
    ph2ocraft's Avatar
    Join Date
    Apr 2006
    Location
    Campbell, Ca.
    Posts
    14,100
    +1
    105
    Sounds good, I have a set of cases that need some welding but they are yours for shipping.

  3. #3
    SeaLion's Avatar
    Join Date
    Aug 2006
    Location
    Ride Mohave To Havasu. Live In Los Angeles.
    Posts
    841
    I checked partsland.com and the reeds for the 900 and 1200 are the same.

  4. #4
    OzVirage's Avatar
    Join Date
    Jan 2007
    Location
    Australia
    Posts
    47

    case

    Quote Originally Posted by ph2ocraft View Post
    Sounds good, I have a set of cases that need some welding but they are yours for shipping.

    Oz: Thank you Al, (Al did offer me this in a pm hope he doesnt mind me saying).

    I will ask Richie if he could use them & if so I would be very happy to take them off your hands...

  5. #5
    Bernie's Avatar
    Join Date
    Aug 2006
    Location
    Perth Australia
    Posts
    902
    +1
    1
    OZ
    Can you post a list or pm me what you need ?
    Cheers
    Bernie

  6. #6
    OzVirage's Avatar
    Join Date
    Jan 2007
    Location
    Australia
    Posts
    47

    list of parts

    I am pretty sure I need

    Set of pistons
    Gasket & seal kit
    Crank
    Case
    maybe one cylinder
    1 x 92 octane dome

    I have been speaking to Richie from Sharps who I think in the end I will have build me an engine ($2100 including all that I mentioned above, I just send him my cylinders), John from Unishippers has been great also & got me a shipping quote of around $425.00 or so, so thats down to roughly $2500.00

    If I had the cash today I would give Richie the go ahead, still working on a way to get the $$$

  7. #7
    Bernie's Avatar
    Join Date
    Aug 2006
    Location
    Perth Australia
    Posts
    902
    +1
    1
    Oz
    aus or us$
    Cheers
    Bernie

  8. #8
    OzVirage's Avatar
    Join Date
    Jan 2007
    Location
    Australia
    Posts
    47
    Those are US$

  9. #9
    AWA Member 32DegH2O's Avatar
    Join Date
    Aug 2006
    Location
    Minneapolis, Mn.
    Posts
    2,008
    +1
    5
    Heck for that much couldn't you just go and buy Al's SLTX? Heck he lives on the American west coast so you could just ride it home!! ...no shipping! And with how fast his SLTX goes, it wouldn't take you anytime at all. Al, didn't you say it was for sale? JK!

    P.S. Sorry I don't have anything that would be able to help ya out getting her back together.
    Last edited by 32DegH2O; 03-28-2007 at 08:32 AM.

  10. #10
    ph2ocraft's Avatar
    Join Date
    Apr 2006
    Location
    Campbell, Ca.
    Posts
    14,100
    +1
    105
    I'm trying to keep it BUT room is an issue and then what is Kevin going to ride none of his craft are running.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. GPR back on the water and quick ?'s
    By PuprleNuprleGPR in forum Yamaha PWC Performance (2-stroke)
    Replies: 10
    Last Post: 08-30-2007, 01:23 PM
  2. Back on the water and..........
    By Region8Ultra250X in forum Kawasaki PWC Performance (4-stroke)
    Replies: 0
    Last Post: 07-29-2007, 04:36 PM
  3. Back On The Water
    By TxVirageTx in forum Polaris Open Discussion
    Replies: 4
    Last Post: 05-21-2007, 12:42 AM
  4. Back on the water today!
    By Bryan K in forum Yamaha PWC Performance (2-stroke)
    Replies: 1
    Last Post: 04-12-2007, 10:56 PM
  5. Back on the water thanks to Jerry!!!
    By TorquePhoto in forum 4-Tec Performance
    Replies: 3
    Last Post: 08-03-2006, 09:46 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •