05-15-2014, 07:17 PM #1
- Join Date
- Jun 2013
slx 1200 swapped with genesis 1200 motor now firing issues?
Had a blown up carbed 1200 polaris SLX Had all new ignition before it blew up.. we swapped over the stator and flywheel to a carbed genesis motor. Now the motor will fire but sounds like its missing and sometimes backfires before it fires.
this is how we have the plug wires going right now... we when we got the ski the wires were not connected and this is the only way it fires... any help will be greatly appreciated thx
05-15-2014, 09:38 PM #2
- Join Date
- Jul 2007
- near Toronto, Canada
Ground two spark plugs, see if it will start with just the MAG connected.
If yes, switch to just the CEN connected. Will it start?
Then do the PTO cylinder.
It should start and run (equally poorly) on each single cylinder.
Sometimes the ignition coils for the CEN and PTO get swapped.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By speed passion in forum Polaris Open DiscussionReplies: 18Last Post: 05-24-2012, 01:26 PM
By blasterboy1980 in forum Yamaha ClassifiedsReplies: 1Last Post: 03-22-2010, 12:13 PM
By hammerurhouse in forum Polaris Open DiscussionReplies: 6Last Post: 07-15-2009, 12:11 PM
By ryanbgb22 in forum Polaris Open DiscussionReplies: 29Last Post: 08-11-2008, 09:18 PM
By jewraffe in forum Polaris Open DiscussionReplies: 8Last Post: 02-08-2008, 10:46 AM