05-19-2014, 12:52 AM #1
Riva pressure regulator relocation
I just installed the riva regulator up front. My arms would never reach it on the tank. more pics coming. Only mod to the regulator was turning the return line barb 180 degrees back to the tank. Removed The oetiker clamps and repositioned the hoses where I wanted them to be with my hose routing then reinstalled new clamps. I also shortened the fuel line originally on the fuel rail to meet up with the regulator. After all said done installed with new stainless hardware.
05-19-2014, 12:53 AM #2
05-19-2014, 02:26 AM #3
- Join Date
- Aug 2012
definitely a PITA to get to it there.many of us on here have built our regulators from scratch and done something similar.nicely done !
05-19-2014, 11:26 AM #4
I know, i was tight on time and didn't want to go shopping all over for fittings. Plus i didnt really know what fitting i was going to need due to placement and such.
05-19-2014, 12:12 PM #5
- Join Date
- May 2013
05-19-2014, 06:00 PM #6
05-20-2014, 07:23 AM #7
Cool, looks good. I never understood the on top of tank mount. I would suggest replacing the worm gear clamps with at least some Oetiker clamps.
The only downfall to putting it in front of the engine is that it may be in the way when you need to remove the charger or replace clutch in the future.
Here is my install to help you with some of the fittings and hose if you want to change over later down the road.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By Louis914 in forum 4-Tec PerformanceReplies: 24Last Post: 11-16-2011, 07:28 AM
By skigolfnut in forum Sea Doo ClassifiedsReplies: 1Last Post: 07-06-2011, 06:37 AM
By vxrpete8 in forum Yamaha ClassifiedsReplies: 10Last Post: 01-19-2011, 03:43 PM
By Green Hulk in forum 4-Tec PerformanceReplies: 8Last Post: 12-14-2009, 06:38 PM
By Green Hulk in forum Yamaha PWC Performance (4-stroke)Replies: 18Last Post: 08-12-2009, 12:30 PM