Results 1 to 5 of 5
  1. #1

    Join Date
    Sep 2006
    Location
    SC
    Posts
    595
    +1
    10

    GPR 1200/1300 parts

    Set of (3) brand new R&D 1300 heads - $375

    *Sold* (1) new R&D 1300 head - $75

    *Sold* VForce3 rare "3 petal" design. Reeds are like new with only 10 hours. These are the reeds used by WFO and Fercho. I've tested these against the 4 petal design with stoppers and theres no comparison. Throttle response is much better with the 3 petal and no stoppers and gained 50 rpm on my previous single pipe stroker motor gpr. Reeds come with cages built in, spacer and bolts (no gaskets). $450

    Protec GPR intake manifold with bolts/hardware - manifold is port matched to the vforce3s and blackjack 48mm carbs. $150

    Prices do not include shipping & Paypal fee

    **More to come...**
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	image.jpg 
Views:	98 
Size:	177.1 KB 
ID:	329918   Click image for larger version. 

Name:	image.jpg 
Views:	56 
Size:	19.5 KB 
ID:	329917   Click image for larger version. 

Name:	image.jpg 
Views:	70 
Size:	100.8 KB 
ID:	329915   Click image for larger version. 

Name:	image.jpg 
Views:	62 
Size:	19.0 KB 
ID:	329916   Click image for larger version. 

Name:	image.jpg 
Views:	68 
Size:	143.2 KB 
ID:	329914  
    Last edited by Screamin'SLX; 07-03-2014 at 08:03 AM.


  2. #2

    Join Date
    Sep 2006
    Location
    SC
    Posts
    595
    +1
    10
    More pictures.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	image.jpg 
Views:	64 
Size:	134.9 KB 
ID:	329923   Click image for larger version. 

Name:	image.jpg 
Views:	53 
Size:	167.0 KB 
ID:	329924   Click image for larger version. 

Name:	image.jpg 
Views:	57 
Size:	166.4 KB 
ID:	329925  

  3. #3

    Join Date
    Sep 2006
    Location
    SC
    Posts
    595
    +1
    10
    Blackjack 48mm carbs with a whoppin' 45 minutes on them! Carbs are mint!! $1,200 (carbs alone cost $1,500). Here's what's included:
    -Prok flame arrestors
    -Speedwerx port matched intake manifold
    -(2) brand new Mikuni high volume external fuel pumps (plus 1 new fuel pump that attaches to carbs)
    -Novi linkage
    -Restrictors drilled out
    -(3) new Mikuni rebuild kits & assorted jets

    Complete set of Speedwerx GPR triple pipes and Advent ignition with the Speedwerx curves. Excellent condition with 40 hours. No leaks. One pipe was previously welded and has worked flawlessly for the last 20+ hrs. These are the updated version with the extra support mount. Advent works perfectly and has 4 triple pipe curves. Two Factory Pipe pump gas curves for triples and two Speedwerx triple pipes curves (1 pump gas/1 race gas). Also included are brand new springs and o-rings. $1,200

    My complete 1456 big bore is also for sale...pm me if interested. All I need are gaskets & seals to be able to assemble it. This is the motor out of Kerry's 90 plus mph boat and Kevin w/ WCP did the port-matching. A few details:
    -R&D heads
    -Brand new Riva gas valves with billet caps
    -Freshly replated cylinders by Millennium
    -Port matched cylinders
    -New Wiseco 89mm piston kits
    -WCP ported & clearanced cases
    -New T/W Protec OEM crankshaft
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	image.jpg 
Views:	47 
Size:	82.8 KB 
ID:	329959   Click image for larger version. 

Name:	image.jpg 
Views:	43 
Size:	71.6 KB 
ID:	330038   Click image for larger version. 

Name:	image.jpg 
Views:	44 
Size:	78.4 KB 
ID:	330037  
    Last edited by Screamin'SLX; 05-25-2014 at 09:12 PM.

  4. #4

    Join Date
    Sep 2006
    Location
    SC
    Posts
    595
    +1
    10
    Motor pic
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	image.jpg 
Views:	65 
Size:	114.0 KB 
ID:	329961   Click image for larger version. 

Name:	image.jpg 
Views:	53 
Size:	74.0 KB 
ID:	330018   Click image for larger version. 

Name:	image.jpg 
Views:	47 
Size:	119.7 KB 
ID:	330019   Click image for larger version. 

Name:	image.jpg 
Views:	49 
Size:	79.2 KB 
ID:	330020   Click image for larger version. 

Name:	image.jpg 
Views:	46 
Size:	83.4 KB 
ID:	330021  
    Last edited by Screamin'SLX; 05-21-2014 at 08:15 PM.

  5. #5

    Join Date
    Sep 2006
    Location
    SC
    Posts
    595
    +1
    10
    Package deals available on all parts.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. SOLD GPR 1200/1300 Parts
    By smacota1 in forum Yamaha Classifieds
    Replies: 4
    Last Post: 01-19-2016, 08:19 PM
  2. FS ********gpr 1200/1300 parts **********
    By hybridGPR in forum Yamaha Classifieds
    Replies: 2
    Last Post: 01-07-2010, 01:38 AM
  3. FS gpr 1200/1300 Various Parts
    By hybridGPR in forum Yamaha Classifieds
    Replies: 13
    Last Post: 01-03-2010, 12:29 AM
  4. R & D M-16 Valves for GPR 1200,1300
    By KawieGuy in forum Yamaha Classifieds
    Replies: 3
    Last Post: 12-03-2008, 01:47 PM
  5. GPR 1200 / 1300 pump conversion
    By mjet in forum Yamaha PWC Performance (2-stroke)
    Replies: 5
    Last Post: 04-02-2006, 11:08 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •