Page 1 of 2 1 2 LastLast
Results 1 to 10 of 11
  1. #1
    ThrottleOut's Avatar
    Join Date
    Aug 2011
    Location
    Corning, NY
    Posts
    727
    +1
    29

    Fuji 750 1 Jug/head & 1 cylinder/piston/head

    Selling some spare parts I found cleaning up the house.

    First up, cylinder head/jug. The piston was holed and did a lean burn-down. It had a factory-sized piston in it so I suspect a light hone to clean it up and you'd be good to go. Free, you pay actual shipping!!!



    Next, cylinder head/piston/jug. Matched set that were on my SLT since I purchased it. I used the best parts I had from two motors and this one was next up to be reused. It had 124 psi and does have some pitting from running lean. It was like that since I purchased it and I never had an issue with it. Free, you pay shipping!! Also, the lines on the bottom of the cylinder walls are just oil from where the piston was sitting. Both of these were coated with 2-smoke oil to keep 'em from getting rusty.





    Any questions, just ask!

    Last edited by ThrottleOut; 05-20-2015 at 07:45 AM.


  2. #2
    ThrottleOut's Avatar
    Join Date
    Aug 2011
    Location
    Corning, NY
    Posts
    727
    +1
    29
    Open to offers! Would much rather sell on here than deal with ebay but these need to go!

  3. #3
    ThrottleOut's Avatar
    Join Date
    Aug 2011
    Location
    Corning, NY
    Posts
    727
    +1
    29
    I was just going to post these up again and realized I already had them up. I also have one jug/head/piston that I did not post up before that's in good shape. I was keeping it as a spare for my SLT750 but now that I no longer have it it's just taking up space. Asking $65 shipped for the good one, $40 shipped for the usable one that got hot (still had 124 PSI and worked fine when pulled) and $25 shipped for the one without a piston. I'd do a package deal of all 3 for $100 including shipping if someone wanted as well.

    Looking to clean house so make offers, also see my other ad for misc parts!

  4. #4
    BlueFishCrisis's Avatar
    Join Date
    Aug 2011
    Location
    Medina, Ohio, United States
    Posts
    4,988
    +1
    140
    So which of those is the one in the pics?

  5. #5
    ThrottleOut's Avatar
    Join Date
    Aug 2011
    Location
    Corning, NY
    Posts
    727
    +1
    29
    I don't have any pics up of the best one of the bunch but could get some. I basically have a set of 3, one jug without piston, one with a slightly damaged but usable in a pinch piston and another one with a good piston. I'll try to get pics of the good one tonight.

    Update: Here are some pics of the best of the 3 that I have. The piston does have some light scuffing as you can see in the picture. The cylinder walls aren't rusty, it's the reflection of the floor that you see. There are some spots in the cylinder that I'm not sure where they came from. It had 125 PSI and I ran this one on my ski for a few years with no issues until the crank failed. I wouldn't hesitate to drop it in as is.

    Click image for larger version. 

Name:	DSC06457.jpg 
Views:	64 
Size:	86.7 KB 
ID:	347092
    Click image for larger version. 

Name:	DSC06458.jpg 
Views:	63 
Size:	86.1 KB 
ID:	347093
    Click image for larger version. 

Name:	DSC06459.jpg 
Views:	58 
Size:	66.5 KB 
ID:	347094
    Last edited by ThrottleOut; 11-19-2014 at 09:30 PM.

  6. #6
    ThrottleOut's Avatar
    Join Date
    Aug 2011
    Location
    Corning, NY
    Posts
    727
    +1
    29
    Bump, still have these! Will be putting on ebay soon if they don't sell on here.

  7. #7
    ThrottleOut's Avatar
    Join Date
    Aug 2011
    Location
    Corning, NY
    Posts
    727
    +1
    29
    Listed the good combo on ebay...

    New pricing on the others... Either one or both jugs/heads that have no piston and/or the damaged one, free just pay shipping. Good cylinder/piston/head combo for $55 shipped. Or take it all for $65 shipped!
    Last edited by ThrottleOut; 05-20-2015 at 07:47 AM. Reason: Dropped price!

  8. #8
    ThrottleOut's Avatar
    Join Date
    Aug 2011
    Location
    Corning, NY
    Posts
    727
    +1
    29
    Good jug/head/piston combo has sold. If anyone wants the one jug without a piston and/or the other with a pitted piston let me know. They will be yours for the cost of shipping as I just want them gone!

    For what it's worth, I think both jugs would fit in a medium flat rate box so ~$12 to ship.
    Last edited by ThrottleOut; 05-29-2015 at 08:58 AM.

  9. #9
    ThrottleOut's Avatar
    Join Date
    Aug 2011
    Location
    Corning, NY
    Posts
    727
    +1
    29
    I need these gone to make room for new parts for new toys. These will be getting scrapped if no one takes them soon. No one wants a couple 750 Fuji jugs for the cost of actual shipping?

  10. #10

    Join Date
    Jul 2011
    Location
    Roanoke, VA (SML)
    Posts
    54
    i have a blown piston. sounds like you only have some jugs left. but let me know what you still have.
    thanks.

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. WTB Fuji 750 Jug/Piston/Head in good shape
    By ThrottleOut in forum Polaris Classifieds
    Replies: 6
    Last Post: 04-07-2016, 06:55 PM
  2. 95 Fuji 750 - How do I know if my cylinder is shot or not?
    By jasper in forum Polaris Open Discussion
    Replies: 2
    Last Post: 07-20-2009, 01:44 PM
  3. f.s. polaris sl slt 750 cylinder/piston/rings/head
    By nick34 in forum Polaris Classifieds
    Replies: 2
    Last Post: 07-04-2009, 05:01 PM
  4. Need a piston, cylinder jug head for 94 gtx
    By cubsfan2516 in forum Sea Doo Classifieds
    Replies: 0
    Last Post: 08-11-2008, 11:11 PM
  5. wanted 3 pistons, cylinder, jugs, heads
    By mike60002 in forum Polaris Classifieds
    Replies: 0
    Last Post: 07-27-2008, 05:03 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •