Results 1 to 9 of 9
  1. #1

    Need advice Please

    I have a 2011 FX SHO with:
    • Top Loader w seal kit
    • R&D Ride Plate
    • DynaFly 13/22
    • R&D Nozzle
    • Worx Sponsons
    • Free Flow exhaust
    • R&D Intake
    • Manifold Bypass
    • IC CFM kit
    • Engine Breather kit
    • (Not Yet installed) R&D Cooling Kit, the $249 one.
    I'm only pulling 67.4MPH on the GPS. I'd like to upgrade the SC wheel next and the ECU but dont want to throw another G in for an IC yet... Do I go with the B1, C1, or C3? R1 Tune, R2 Tune, or the V-Tech reprogram?

    Also, I'd like to try Shimming my Ride Plate... Any advice here?

    I'm looking for at least a 75mph run consistantly.. Thank you.


  2. #2

    Join Date
    Apr 2013
    Location
    south america , argentina
    Posts
    95
    +1
    8
    Quote Originally Posted by mulligs View Post
    I have a 2011 FX SHO with:
    • Top Loader w seal kit
    • R&D Ride Plate
    • DynaFly 13/22
    • R&D Nozzle
    • Worx Sponsons
    • Free Flow exhaust
    • R&D Intake
    • Manifold Bypass
    • IC CFM kit
    • Engine Breather kit
    • (Not Yet installed) R&D Cooling Kit, the $249 one.
    I'm only pulling 67.4MPH on the GPS. I'd like to upgrade the SC wheel next and the ECU but dont want to throw another G in for an IC yet... Do I go with the B1, C1, or C3? R1 Tune, R2 Tune, or the V-Tech reprogram?

    Also, I'd like to try Shimming my Ride Plate... Any advice here?

    I'm looking for at least a 75mph run consistantly.. Thank you.


    check your rpm's there are fundamental. you are running slow for the mods , maybe your rpms are low , with that mods you must run 73 mph aporx.

  3. #3
    yol937's Avatar
    Join Date
    Jul 2011
    Location
    Nc
    Posts
    1,071
    +1
    160
    What R&D nozzle are u using? Which size?

  4. #4
    powerstroke specialist mikegp's Avatar
    Join Date
    Mar 2011
    Posts
    2,529
    +1
    190
    Quote Originally Posted by riveride View Post
    Quote Originally Posted by mulligs View Post
    I have a 2011 FX SHO with:
    • Top Loader w seal kit
    • R&D Ride Plate
    • DynaFly 13/22
    • R&D Nozzle
    • Worx Sponsons
    • Free Flow exhaust
    • R&D Intake
    • Manifold Bypass
    • IC CFM kit
    • Engine Breather kit
    • (Not Yet installed) R&D Cooling Kit, the $249 one.
    I'm only pulling 67.4MPH on the GPS. I'd like to upgrade the SC wheel next and the ECU but dont want to throw another G in for an IC yet... Do I go with the B1, C1, or C3? R1 Tune, R2 Tune, or the V-Tech reprogram?

    Also, I'd like to try Shimming my Ride Plate... Any advice here?

    I'm looking for at least a 75mph run consistantly.. Thank you.


    check your rpm's there are fundamental. you are running slow for the mods , maybe your rpms are low , with that mods you must run 73 mph aporx.
    can you explain how did you came out with that number?
    there's no way in hell he can run that speed with the oem ecu and wheel.

  5. #5
    powerstroke specialist mikegp's Avatar
    Join Date
    Mar 2011
    Posts
    2,529
    +1
    190
    im running a R3 , B1 wheel , svho i/c ,grate and seal kit , water cooling kit, hks surge protector, oem plate and a way to big prop 13/25 and it was only getting 73.8 with half a tank , two riders , and two broken vanes on the pump.

  6. #6
    LOL oh its been done and none the less on a SHO

  7. #7
    powerstroke specialist mikegp's Avatar
    Join Date
    Mar 2011
    Posts
    2,529
    +1
    190
    Quote Originally Posted by FXSlowKroozer View Post
    LOL oh its been done and none the less on a SHO

  8. #8
    Hydro Force Steering Nozzle...

    Also forgot to mention the Anti-Cavitation cone by R&D.

  9. #9
    Quote Originally Posted by riveride View Post
    Quote Originally Posted by mulligs View Post
    I have a 2011 FX SHO with:
    • Top Loader w seal kit
    • R&D Ride Plate
    • DynaFly 13/22
    • R&D Nozzle
    • Worx Sponsons
    • Free Flow exhaust
    • R&D Intake
    • Manifold Bypass
    • IC CFM kit
    • Engine Breather kit
    • (Not Yet installed) R&D Cooling Kit, the $249 one.
    I'm only pulling 67.4MPH on the GPS. I'd like to upgrade the SC wheel next and the ECU but dont want to throw another G in for an IC yet... Do I go with the B1, C1, or C3? R1 Tune, R2 Tune, or the V-Tech reprogram?

    Also, I'd like to try Shimming my Ride Plate... Any advice here?

    I'm looking for at least a 75mph run consistantly.. Thank you.


    check your rpm's there are fundamental. you are running slow for the mods , maybe your rpms are low , with that mods you must run 73 mph aporx.
    RPM's are around 7500, but I will pay more close attention next weekend...

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Repaired nose of waverunner need to paint front end need advice please. Pics?
    By Billseyephoto in forum Yamaha Projects & Build Threads
    Replies: 4
    Last Post: 04-27-2013, 09:33 PM
  2. 750 ZXI Starter removed, need advice please!
    By splashman in forum Kawasaki Open Discussion
    Replies: 0
    Last Post: 08-14-2010, 05:35 PM
  3. Need advice , please.
    By RichieFZR in forum Yamaha PWC Performance (4-stroke)
    Replies: 20
    Last Post: 07-02-2010, 06:03 AM
  4. need advice please?
    By xpfreak in forum Polaris PWC Performance
    Replies: 2
    Last Post: 08-05-2009, 11:08 PM
  5. 1300 hull crack...need advice please read
    By RXPNJ in forum 4-Tec Performance
    Replies: 3
    Last Post: 06-28-2005, 10:30 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •