06-12-2014, 04:45 PM #1
anyone tried SKAT 14 VEIN 155MM pump ?
i need a feed back about the skat 14 vein 155mm pump
i will be ordering this pump for my ski but before i do i need to see the results of this pump
06-12-2014, 05:21 PM #2
06-12-2014, 10:35 PM #3
06-13-2014, 01:56 PM #4
Hey isa why are you stepping down from the 160, I know you where using the Riva pump at one time then went back to stock. I'm sure that turbo can boost enough for the 160.
06-13-2014, 03:42 PM #5
- Join Date
- Aug 2012
it dropped his speed.
06-16-2014, 11:36 AM #6
06-16-2014, 11:39 AM #7
isa what 160 pump are You currently running?
06-16-2014, 12:39 PM #8
06-16-2014, 03:26 PM #9
i do have try this.
But this is not on a FZR this is tested on a GPRSHO conversion with R2 reflash and c1 wheel(boost was around 9 psi/9.5psi rpm 8100-8150)
1:Stock sho pump 155mm 140kph/87mph
2:skat-trak magnum 155mm comparing to stock 155mm (sho,05 gpr up) losing speed.
3:skat-trak magnum 158mm comparing to stock 155mm (sho,05 gpr up) losing more speed.
The speed don't drop dramatically(4-1mph) but its slow the bout down on WOT but it increase the holeshot with the 158 magnum and also 155mm magnum, comparing to the stock 155mm you feel difference when you take off.
After this test i really want to try the rivas 160mm 12 vein pump!
But i did read on greenhulk forum the same week i almost order the pump somebody try this on a gprsho(greenhulk member) with very very negative results then i figure i stay with the 155mm stock pump because i'm only want speed.
Okey this was not made by some to science man but i got this resultat!
Others feel free to join in this talk to i want to know as well if somebody got other results??
Good luck Isa.
06-16-2014, 10:21 PM #10
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By Badvgood in forum 4-Tec PerformanceReplies: 10Last Post: 01-15-2013, 02:08 PM
By dv8rxp in forum 4-Tec PerformanceReplies: 13Last Post: 11-26-2008, 05:12 PM
By JOSE13RT in forum 4-Tec PerformanceReplies: 2Last Post: 10-14-2007, 08:49 AM
By novice_4 in forum 4-Tec PerformanceReplies: 0Last Post: 06-14-2006, 08:24 PM
By VFX_Artist in forum 4-Tec PerformanceReplies: 1Last Post: 07-17-2005, 09:51 PM