Page 1 of 2 1 2 LastLast
Results 1 to 10 of 18
  1. #1
    mcdog's Avatar
    Join Date
    Jul 2009
    Location
    Georgia
    Posts
    36
    +1
    2

    Parting out gp1200 and waveraider

    Gp1200 is everything. The motor melted a piston from what I suspect is a bad crank bearing.

    Waveraider had a 61x sbt motor in it. Bought it for the trailer to keep for my stand ups and to part out.

    I haven't sold here before because I'm more of a stand up guy. I have great feedback at www.x-h20.com

    Contact me with your needs. I will be very reasonable. I want this stuff gone. I plan to update with photos and individual part prices soon but in the meantime I will keep the rules by saying $1000 plus shipping for each ski.
    Last edited by mcdog; 06-30-2014 at 08:37 AM.


  2. #2

    Join Date
    Jun 2014
    Location
    Kentucky
    Posts
    11
    looking for a left side stabilizer for a '94 wave raider. what year is your raider?

  3. #3

    Join Date
    Jul 2009
    Location
    Northern Indiana
    Posts
    11
    Price on engine cases for the gp1200 please.
    I'm in Indiana for shipping calculatioins.

    Thanks

  4. #4
    what motor? may need cdi for 65u

  5. #5
    mcdog's Avatar
    Join Date
    Jul 2009
    Location
    Georgia
    Posts
    36
    +1
    2
    Raider parts:

    Start stop switch $45 shipped
    Steering cable $40 shipped
    Trim cable $40 shipped
    Trim grip and cable $30 shipped
    Water box $100 shipped
    Complete Midshaft assembly with coupler (no hull adapter peice) with smooth bearings and the coupler $100 shipped

    144 pump with drive shaft and prop and wear ring but no pump/steering nozzle $120 shipped
    Pump and steering nozzle with trim ring $100 shipped

    The rest of the raider parts are gone.
    Last edited by mcdog; 07-03-2014 at 06:27 AM.

  6. #6
    mcdog's Avatar
    Join Date
    Jul 2009
    Location
    Georgia
    Posts
    36
    +1
    2
    1997 gp1200 parts:

    Cases $250 shipped SOLD
    Cylinder that need one hole bored $150 shipped SOLD
    Start stop switch $45 shipped
    Midshaft assembly $100 shipped
    155 pump and prop and drive shaft and wear ring $250 shipped
    Carbs and intake and reeds set up for reverse jetting and bought from pilo704 on here. This what he said about them: the jetting is the prefference of a guy we have on the boards who is a carb guru, it is set up for a stock motor but you can open the scews for flame arrestors as well....the mains are at 135, the pilots are at 110, the needle and seats are 1.5s and the springs are 95g syncronized by me with a mikuni pop off tester for 55 psi...also bill recomended that i double the seal between the jet body and carbs, this keeps the carbs from dribling at idle...from what i here carbs with this set up run better then stock and like i sed, you wont have to re jet if you ran flame arrestors... oh and the screws have been replaced with t handels..-mike $250 shipped

    Complete ignition with stator and flywheel $350 SOLD

    Plenty more parts just ask. Everything is obo and I will combine shipping for discounts.
    Last edited by mcdog; 08-08-2014 at 10:31 AM.

  7. #7
    mcdog's Avatar
    Join Date
    Jul 2009
    Location
    Georgia
    Posts
    36
    +1
    2
    Pics. More coming.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	20140703_064023.jpg 
Views:	53 
Size:	99.9 KB 
ID:	334685   Click image for larger version. 

Name:	20140703_063814.jpg 
Views:	55 
Size:	114.8 KB 
ID:	334686   Click image for larger version. 

Name:	20140628_094856.jpg 
Views:	55 
Size:	89.7 KB 
ID:	334684  

  8. #8
    mcdog's Avatar
    Join Date
    Jul 2009
    Location
    Georgia
    Posts
    36
    +1
    2
    Gp1200 cases and cylinder and ignition are sold.

  9. #9
    mcdog's Avatar
    Join Date
    Jul 2009
    Location
    Georgia
    Posts
    36
    +1
    2
    Wow. Not a single pm ever. If you think my prices are off make me some offers.

  10. #10

    Join Date
    Jul 2014
    Location
    Middlefeild ct
    Posts
    5
    Do u have a gp1200 5 deg pump nozzle need on for my raider

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Parting Out a 95 WaveRaider 1100
    By Pitstop504 in forum Yamaha Classifieds
    Replies: 16
    Last Post: 03-18-2011, 10:35 AM
  2. Parting Out a '95 Waveraider 1100
    By jetmaniac in forum Yamaha Classifieds
    Replies: 12
    Last Post: 03-14-2010, 12:42 PM
  3. Parting out RXP and RXT
    By scottbaty in forum Sea Doo Classifieds
    Replies: 5
    Last Post: 05-14-2009, 07:44 PM
  4. parting out 96 760 waveraider
    By artdude in forum Yamaha Classifieds
    Replies: 10
    Last Post: 07-28-2008, 10:35 AM
  5. Fastes known Gp1200 and Waveraider 1100
    By codemanrose in forum Yamaha Old School Skis
    Replies: 27
    Last Post: 12-29-2006, 12:59 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •