Page 1 of 2 1 2 LastLast
Results 1 to 10 of 12
  1. #1

    Where to get T-bolt clamps

    Where is a good place to order T bolt clamps for the intercooler piping?

    Thanks.


  2. #2
    What are you up to now?

  3. #3
    I ordered mine from www.westmarine.com, but here is another place to look: www.stylinmotors.com

    I`m sure other members will have more to show ya!...PR...

  4. #4
    Hey Muddy: Not up to anything. I have a boost leak on the clamp that goes on the fitting off the supercharger to the 2 1/2 inch pipe on the pipe side. Saw a black mark about 3" long right off the coupling on the aluminum tubing to the intercooler. There was actually a black mark a couple inches long on the inside of the hull about 6" from the tubing where the air was blowing out and hitting the inside hull. Just finally realized what was happening. My clamps were as tight as I could get them, but obvioulsy not tight enough. Hopefully, the T-bolt style will be better. Supercharger is off for fresh ceramic bearings and washers. Pump is at Skat for fresh bearings and a new ss liner--had .006-.013" blade to wear ring clearence. Riva wedge, extension rod and rear air intake are on their way. Had the Rxt out yet?

  5. #5
    Not yet Mark. I ordered a wetsuit and boots so I can get out this month! I need to get the RXP into Danny's hands so he can do his thing with it! See ya soon I hope!

  6. #6
    lextoy's Avatar
    Join Date
    Jan 2007
    Location
    Brigantine, NJ
    Posts
    1,883
    +1
    14
    when you order the T bolt clamps for the 2.5 inch exhaust, which one do you get?? i'm guessing its the first??

    T-Bolt Exhaust Clamp - Dia. Range: 2.68"-3.34"; Hose ID 2 1/2"

    T-Bolt Exhaust Clamp - Dia. Range: 2.31"-2.69"; Hose ID 2"

  7. #7
    lextoy's Avatar
    Join Date
    Jan 2007
    Location
    Brigantine, NJ
    Posts
    1,883
    +1
    14
    thats westmarine specs btw.

  8. #8
    cbrich's Avatar
    Join Date
    Nov 2006
    Location
    Around Lake Travis
    Posts
    1,374
    +1
    1
    I got mine from a local hydraulic supply store.

  9. #9
    Im a Rude guy
    Join Date
    May 2005
    Location
    cape coral florida
    Posts
    250
    I got mine of NAPA

  10. #10
    Fast & Loud meeper's Avatar
    Join Date
    Jul 2005
    Location
    West Grove, PA
    Posts
    5,019
    +1
    54

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. SC bolts, where to get them?
    By KeithKman in forum 4-Tec Performance
    Replies: 12
    Last Post: 05-11-2010, 01:12 AM
  2. Where to get t-bolt clamps?
    By subparwelder in forum 4-Tec Performance
    Replies: 6
    Last Post: 09-04-2008, 10:23 PM
  3. Where to buy t-bolt clamps
    By cbrich in forum Sea Doo Open Discussion
    Replies: 3
    Last Post: 04-13-2008, 03:01 PM
  4. Anybody know where to get Oetiker Clamps?
    By yellow4 in forum 4-Tec Performance
    Replies: 1
    Last Post: 09-11-2007, 11:34 PM
  5. Where to get...?
    By GeoRXT in forum Sea Doo Open Discussion
    Replies: 4
    Last Post: 05-16-2006, 11:03 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •