07-02-2014, 07:39 AM #1
Kaw stand up ski carb adjustments
I am trying to get a 90 Kaw 550 stand up ski to open up. I have put in a new kit which is the round carb but didn't mess with the high and low speed settings because I didn't know what they set on. Everything looks stock no mod. compression 120 on both cylinders. I didn't know if I needed to do a popoff test on this also. I never messed with a stand up ski before so it's a friend. It starts up and runs good on water just won't open up. any help on this please !
07-03-2014, 06:58 AM #2
07-11-2014, 06:14 AM #3
"It starts up and runs good on water just won't open up." What does that mean?
07-11-2014, 06:42 AM #4
- Join Date
- Jul 2007
- near Toronto, Canada
07-11-2014, 08:29 PM #5
Steve it will start up and idle fine till I get to about half throttle it bogs just won't take full throttle.
07-11-2014, 08:36 PM #6
k447 I did cleaned everything so the settings were pto low speed set at 1, high set at 5/8 mag the only setting 7/8 is what it was so I put it back to that number. I talked with a guy he told me that I may need to put a #30 jet in the return line. Any help would be great !
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By tryintolearn in forum Polaris How To & FAQsReplies: 14Last Post: 07-28-2007, 11:32 PM
By t1turner in forum Polaris How To & FAQsReplies: 1Last Post: 06-08-2007, 11:47 AM
By jcc011185 in forum Polaris PWC PerformanceReplies: 5Last Post: 05-07-2007, 03:55 PM
By tommy33mac in forum Polaris How To & FAQsReplies: 5Last Post: 04-07-2007, 08:15 PM
By brandn in forum Yamaha PWC Performance (2-stroke)Replies: 8Last Post: 12-16-2006, 09:47 AM