07-06-2014, 04:47 PM #1
300x supercharger belt snapped at 82hours?
As above its -2012 82 hours recently been serviced, I've noticed on the speedo it say top speed 103 and looking at the boost bar it only gets up to the letter b in boost approx 1200psi flat out, it is stock though, but thought it might be relavent.
I was out on the ski yesterday going pretty hard 80-90 ks and then it just stopped and would only crawl at no more than 20 ks , my question is, is this normal? Can a pulley seize up? Apart from belt failing is there anything else it could be?
07-06-2014, 06:24 PM #2
it happens might be a maintenance issue, we are getting well in excess of 150hrs but i have heard of the odd one breaking much earlier. boost gauge sounds a little low so i would check my clamps possibly clean the i/c and the operation of the bov if it is still a stocker.
07-06-2014, 08:08 PM #3
You mean KMs?
Have visually inspected the belt by taken cover off and seeing it spin on pulley while on the trailer?
But Sounds like a boost leak, happened similar to me...
Were hoses recently removed for IC cleaning or other maintenance or inspection,maybe not tighten enough and are blowing off or leaking boost air...
07-06-2014, 08:52 PM #4
he means klm's because he's from aussie we are the only country using the correct measurement for speed
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By toomanytoys in forum Kawasaki PWC Performance (4-stroke)Replies: 42Last Post: 11-14-2013, 05:42 PM
By GDM in forum Kawasaki PWC Performance (4-stroke)Replies: 33Last Post: 08-11-2012, 08:30 PM
By karlt in forum Kawasaki PWC Performance (4-stroke)Replies: 5Last Post: 01-30-2009, 08:25 AM
By EGGonz in forum Kawasaki PWC Performance (4-stroke)Replies: 7Last Post: 05-23-2008, 08:30 AM
By xxxshowdownxxx in forum Kawasaki PWC Performance (4-stroke)Replies: 5Last Post: 10-01-2007, 10:38 PM