Results 1 to 5 of 5

Thread: nozzle size?

  1. #1

    Join Date
    Mar 2006
    Location
    Biloxi, MS
    Posts
    181

    nozzle size?

    I know I should have searched, but I was to lazy The ski is a 03 with a 4 deg key, milled stock head, 05 pump with a 14/20 impeller, descreened air box and riva race filter, v-force 2 reeds, d plate, Jims ride plate, 1200 intake grate and a 87mm nozzle. I am getting 7200 rpm and 73 mph with no problems. My question is, should I run a 85 nozzle instead of the 87? And of course. Thanks for the input.


  2. #2
    My son (mohawk man) jeffsntx's Avatar
    Join Date
    Sep 2006
    Location
    Belton TX
    Posts
    2,598
    +1
    1
    Do you still have the siphon tube in the 87mm nozzle?

  3. #3

    Join Date
    Mar 2006
    Location
    Biloxi, MS
    Posts
    181
    Yes.

  4. #4
    MR. SCOVILLE UNIT SUCKMYWAKE's Avatar
    Join Date
    Aug 2005
    Location
    ASTON, PENNSYLVANIA
    Posts
    2,836
    +1
    8
    my ski is faster with the 85 as opposed to the 87
    usually the 85 gives better holeshot and is slower on the top
    the 87 is faster on the top
    but for me it is just the opposite

  5. #5
    Duke's Avatar
    Join Date
    Jul 2006
    Location
    Florida
    Posts
    10,004
    +1
    406
    I have had the best performance with the 85mm. Could just be my setup though. Looking at your rpms it would probably drop you down about 50 and give a little boost on speed.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Stock nozzle size?
    By engineermike in forum 4-Tec Performance
    Replies: 4
    Last Post: 11-04-2007, 11:02 PM
  2. Nozzle size per speed?
    By great lakes gpr 1200 in forum Yamaha PWC Performance (2-stroke)
    Replies: 8
    Last Post: 05-16-2007, 09:28 AM
  3. High Speed Buck & Nozzle Size
    By 97GPSLEEPER in forum Yamaha PWC Performance (2-stroke)
    Replies: 4
    Last Post: 04-13-2007, 09:18 PM
  4. V nozzle sizes
    By JD 1 in forum 4-Tec Performance
    Replies: 2
    Last Post: 02-06-2006, 09:49 PM
  5. Nozzle size
    By Yambo in forum Yamaha PWC Performance (2-stroke)
    Replies: 17
    Last Post: 01-10-2006, 02:16 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •