Thread: Spark Plug Boot Ground Strip
07-14-2014, 06:06 AM #1
Spark Plug Boot Ground Strip
I wanted to install a spark plug boot grounding location in the ski, but had a hard time finding a Polaris part that would work. I know some of the Domestic skis have them as a stock item, but not all.
The following is a modification to incorporate a Kawasaki ground strip into my Fuji 780 setup. I used a spare piece of 3/4 x 3/4 x 1/8" aluminum angle I had in the garage, and drilled holes to match the Polaris water rail and Kawasaki ground strip spacing, and bolted it in place. Simple, yet effective!
Still available new from Kawasaki. 1 each PN 13091 for 3 cylinder, 13091A for 2 cylinder. Need 3 each PN 11012A for 3 cylinder, 2 each for 2 cylinder. Also available used.
Last edited by BlueFishCrisis; 07-14-2014 at 09:26 AM.
07-14-2014, 07:36 AM #2
07-14-2014, 09:18 AM #3
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By SearayEX12 in forum 4-Tec PerformanceReplies: 10Last Post: 06-10-2008, 10:39 AM
By cmcbride in forum Polaris How To & FAQsReplies: 4Last Post: 05-28-2008, 09:17 AM
By CRAZEDRXP in forum Sea Doo Open DiscussionReplies: 19Last Post: 03-06-2008, 03:41 PM
By axgrider73 in forum Kawasaki Open DiscussionReplies: 2Last Post: 06-08-2007, 10:10 AM
By qbzonk in forum Yamaha PWC Performance (2-stroke)Replies: 5Last Post: 09-04-2006, 11:27 PM