07-18-2014, 02:00 PM #1
160 160 180 is that advanced, do we need to go bac
A tooth. Or just retard a little or full
07-18-2014, 02:21 PM #2
07-18-2014, 08:16 PM #3
07-18-2014, 08:56 PM #4
Yes i do. Its at 135 135 140 now im going to ride it
In the morning and see how it runs.
07-18-2014, 09:09 PM #5
I really like mine, they make a big difference
but I would never run them on pump fuel
07-21-2014, 08:27 PM #6
Okay took the ski out Saturday and it didn't run strong like before I changed my head gasket. The timing is not the same I had to back down my fuel pressure to keepit running all the way to around (40 or so psi) and normally at about 60ish. At about a little over a quarter of
Throttle and about 6700 to 7000 rpm the AFR'S were getting lean and the more throttle you guy's no even worse. I didn't punch it and I saw
14's on the afr,
Those running CP pistons what's your compression, or what should it be around .A good ball bark figure.
07-22-2014, 10:45 AM #7
Is everyone that use CP pistons running the same compression as stock
Pistons or what are you running.
07-22-2014, 10:11 PM #8
Is there anyone running CP 9.5 pistons and what's your compression.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By kckhane41 in forum Yamaha PWC Performance (2-stroke)Replies: 2Last Post: 07-05-2009, 09:17 PM
By GPR in forum Yamaha PWC Performance (2-stroke)Replies: 6Last Post: 05-04-2009, 08:05 AM
By flexfan in forum Yamaha PWC Performance (2-stroke)Replies: 8Last Post: 08-23-2007, 08:46 PM
By N8R in forum Polaris PWC PerformanceReplies: 3Last Post: 01-07-2007, 12:24 AM
By w-nut in forum Yamaha PWC Performance (2-stroke)Replies: 10Last Post: 11-05-2006, 10:23 PM