Thread: 2000 XL1200 wont start
07-18-2014, 11:37 PM #1
2000 XL1200 wont start
Put together a brand new motor on a 2000 66v XL1200. press the starter button, No clicking no cranking, No display, No life.. Popped the cdi box open, jumped the solenoid. It cranks, but No spark.
the Stinger is connected, and plugged in.
what am i looking at?
07-19-2014, 01:37 PM #2
plugged in another start switch. same thing no power.. then i replaced the starter solenoid. same thing. no power from both start switches. removed the brown wire, touched it to the batt terminal on the solenoid. it cranks over fine. No idea what it could be at this point. perhaps both start switches are bad.
any input would be great.
07-19-2014, 01:51 PM #3
- Join Date
- Apr 2007
- JUST NORTH OF CUBA-- FL,KEYS
sounds like a ground wire is not hooked up in elect box to me..my 2 cents
07-19-2014, 02:11 PM #4
- Join Date
- Apr 2006
- panama city beach 'fl
if you look at circuit could be fuse or cdi
07-19-2014, 10:40 PM #5
check your temp sensor at the end of the pipe.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By AraArauna in forum Yamaha PWC Performance (2-stroke)Replies: 3Last Post: 08-24-2011, 10:03 PM
By firestoned in forum Yamaha PWC Performance (2-stroke)Replies: 2Last Post: 06-23-2011, 05:32 PM
By 04SRTurbo in forum Yamaha PWC Performance (2-stroke)Replies: 16Last Post: 09-21-2010, 12:04 PM
By ultramaxracing05 in forum 2-Stroke PerformanceReplies: 31Last Post: 06-28-2010, 01:10 AM
By LiquidPro1200 in forum Polaris PWC PerformanceReplies: 25Last Post: 08-20-2008, 12:02 AM