Page 1 of 8 1 2 3 ... LastLast
Results 1 to 10 of 71
  1. #1

    Join Date
    Jul 2012
    Location
    Oakland, Maine
    Posts
    355
    +1
    19

    SVHO Mods required to beat a rxpx with r3

    So, my friend has a 2014 rxpx running 73 mph on gps with an r3 reflash only and I can't let him be faster than me.... I plan on buying a riva ribbon delete, intake and SCOM for my fzs svho to start. I'd like to hear from people with experience, will these mods net me at least 73? My second round of mods will be a riva free flow exhaust and a ride plate (either R&D or jims, I'm leaning towards jims). I will replace the intake grate and get a pump seal kit shortly after but don't understand how the R&D grate is quicker than stock with almost the same design. What does everyone think regarding my modification plans?


  2. #2

  3. #3

  4. #4

    Join Date
    Jul 2012
    Location
    Oakland, Maine
    Posts
    355
    +1
    19
    I've read them both in their entirety and neither listed results specifically with only my first round of mods (unless I overlooked something). Thanks.


    I'm open to suggestions for my first round of mods if anyone feels a different combination would be better to start with.

  5. #5
    shrabber's Avatar
    Join Date
    Apr 2008
    Location
    Jacksonville, FL
    Posts
    5,305
    +1
    376
    Add the rideplate and yes, the rideplate is a brake like hell!!!. Just to give you a example I run a rd plate on my SVHO and making a small setup change netted me 1.5 mph.

  6. #6

    Join Date
    Jul 2012
    Location
    Oakland, Maine
    Posts
    355
    +1
    19
    Quote Originally Posted by shrabber View Post
    Add the rideplate and yes, the rideplate is a brake like hell!!!. Just to give you a example I run a rd plate on my SVHO and making a small setup change netted me 1.5 mph.
    If you don't mind me asking, what mods and speeds are you running/ achieving?

  7. #7
    Just bolting on an r1 reflash you should be in the 75 mph range. I have a best friend that did 79.1 with just r1 and ribbon delete. Svho is the easiest platform to get into the 80mph range.

  8. #8
    shrabber's Avatar
    Join Date
    Apr 2008
    Location
    Jacksonville, FL
    Posts
    5,305
    +1
    376
    Quote Originally Posted by sbaird4000 View Post
    Quote Originally Posted by shrabber View Post
    Add the rideplate and yes, the rideplate is a brake like hell!!!. Just to give you a example I run a rd plate on my SVHO and making a small setup change netted me 1.5 mph.
    If you don't mind me asking, what mods and speeds are you running/ achieving?
    I will list mods for you
    Riva Front air
    Riva ribbon Delete
    Fizzle intercooler
    Et 19 Wheel
    R&D Shaft and Bearings
    Riva drive shaft sleeve
    Riva fuel Rail
    ID 1000 CC Injectors
    Riva Waterbox
    Riva Free flow Exhaust
    R&D Grate
    R&D Rideplate
    R&D Skat Trak Twin Prop
    Motec M130 Ecu
    Aeromotive Fuel pressure Regulator
    Aeromotive Fuel Pump
    R&D Cooling Upgrade
    RIVA Valve Train Upgrade
    Coco Pump Tunnel Reinforcement
    Cam work ( Shrabber's Garage)

    just to to let you know there is a wall, just as fast as you get to a speed you hit a wall. That's when you have to make technical changes. So when certain ski's go certain Mph what's not visible is "Bliss"

  9. #9

    Join Date
    Jul 2012
    Location
    Oakland, Maine
    Posts
    355
    +1
    19
    WOW! That's quite the list. The SVHO WILL OBSOLETE by the time I catch up to you. Your ski must rip. Thanks for the input.

  10. #10
    Chupacobra's Avatar
    Join Date
    Jun 2012
    Location
    Orlando, FL
    Posts
    1,370
    +1
    408
    Do not do the ribbon delete and scom at the same time. You will be on the limiter, there's a chance of getting away from it due to the hot weather but its not worth it. Now if you do the ribbon and pitch the prop you'll be on your way to some good speed.

    With scom or bypass and r&d ride plate like shrabber said you should be right at 72-73 with a whole lot better accerleration then the rxpx.

Page 1 of 8 1 2 3 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 04 RXP what mods needed to beat 14 rxp-x
    By 411splicer in forum 4-Tec Performance
    Replies: 2
    Last Post: 08-15-2014, 10:35 PM
  2. where to set fuel pressure with r3 reflash & stock wheel
    By wave15stx in forum Yamaha PWC Performance (4-stroke)
    Replies: 23
    Last Post: 05-01-2013, 01:55 PM
  3. RXPX with mods for sale
    By Sundance in forum Sea Doo Classifieds
    Replies: 17
    Last Post: 07-02-2008, 12:01 PM
  4. Replies: 0
    Last Post: 06-28-2008, 09:14 AM
  5. Easy way to properly check oil with no mods or extra parts!
    By Black_Bart in forum Kawasaki PWC Performance (4-stroke)
    Replies: 9
    Last Post: 08-02-2007, 09:21 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •