07-27-2014, 01:05 PM #1
Finally broke the 70mph barrier. Only rubbing I done to my 14 FZR so far was...
Cleaning up the stock grate,stuffing the voids, sealing over the bolt heads and leading edge. Ride plate is next.
Installed a R&D VTS cam and fine tuned the nozzle settings.
Drilled out the stock water strainer. Could visible see improved water flow.
Performed a foam delete.
Done the Tommy Jordan free flow exhaust mod.
Today the temp was in the lower 90s, fresh water temp low 80s and just passed through a no wake zone with a 1/2 tank. Tuesday my SCOM will be here and until then doing a simple mod that Tommy Jordan suggested to improve IC cooling. Sorry I didn't notice the RPMs, too busy holding on.
All I can say I'm a happy boy! Happy boy!!
Last edited by Guidoo; 07-27-2014 at 03:26 PM.
07-27-2014, 01:28 PM #2
Try making another pass with the trim all the way up you'll thabk me later..
07-27-2014, 01:37 PM #3
- Join Date
- Jul 2012
- Oakland, Maine
Nice speed! Listen to chupa, he's knows what's talking about.
07-27-2014, 02:14 PM #4
I don't doubt him. I ran trim up and down. At the current setting it was the fastest. I'll check what it is later and report back. Playing with the IC cooling lines now.
07-27-2014, 02:47 PM #5
What's the simple tommy jordan mod for the ic?
07-27-2014, 03:19 PM #6
He suggested running a billet strainer. For now I opened the holes in the stock strainer. Seems to help.
07-27-2014, 03:23 PM #7
With the engine sitting level,measurement taken using a level app on my phone with it laying across #2&3 coil packs my nozzle angle setting was 7.2deg up.
07-27-2014, 03:38 PM #8
Yes that was one of the first mods I did. I used the riva pump strainer. It has much larger passages vs the oem
07-27-2014, 03:52 PM #9
Just ordered one. I'll use the modded stocky in the wife's FZS.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By Shibby1485 in forum Sea Doo Open DiscussionReplies: 14Last Post: 06-26-2006, 08:03 PM
By Jeff C in forum Sea Doo Open DiscussionReplies: 11Last Post: 05-05-2006, 05:55 PM
By Water4fire in forum Sea Doo Open DiscussionReplies: 9Last Post: 02-23-2006, 11:14 PM
By 11 in forum Sea Doo Open DiscussionReplies: 4Last Post: 09-09-2005, 08:40 AM
By 01xdime in forum 4-Tec PerformanceReplies: 6Last Post: 08-02-2005, 09:22 PM