07-28-2014, 10:08 PM #1
OEM '12-'14 RXP-X Impeller Repitch
The OEM is supposed to be 14/25 (going to pitch measure it tomorrow).
Anyone ever take an OEM all the way to a 14/19 or 15/20?
I'm thinking going from 25 to 19 trailing is too much for the casted blades center geometry.
If all else fails and since I only need 300rpm gain, a 14/22 may be enough...
07-28-2014, 11:53 PM #2
Your wasting your time with the oem prop..... unless your making very small adjustments.
07-29-2014, 06:01 AM #3
While the plan was always to get the 15/20 Solas, tweaking the stock prop can't be that bad. 300rpm isn't that far of a bend...
07-29-2014, 07:04 AM #4
Depending on your mods or what your trying to accomplish, the stock prop is good...
I have a modified stock prop and it is incredible!!!!! It also depends on who bends your prop for you..........
07-29-2014, 08:25 AM #5
I've modded my fair share of props...but 2-strokes. Back in the day and before Skat-Trak publicly came out with the "freeride" prop (curved leading blades), I've disc-wheeled my own (mid-90's). Back then, Region-7 was the biggest innovator in the race scene.
I'll be using an official prop bending tool (not a crescent wrench, but works well) and pitch gauge.
07-29-2014, 03:32 PM #6
Now I'm more confused. My oem prop measures 14/19.5
So much for assuming the seadoo manual is accurate.
Anyone else ever measure the oem impeller?
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By blakegleason in forum eBay FindsReplies: 0Last Post: 04-09-2013, 09:32 AM
WTB - Parts WTB 2 stock oem rxp-x impellers 2008By spinyard in forum Sea Doo ClassifiedsReplies: 2Last Post: 07-30-2012, 07:39 AM
By PIRANHA in forum 4-Tec PerformanceReplies: 28Last Post: 05-15-2007, 09:00 PM
By dre23 in forum 4-Tec PerformanceReplies: 7Last Post: 02-24-2006, 06:06 AM
By meeper in forum 4-Tec PerformanceReplies: 9Last Post: 09-18-2005, 08:11 PM