Page 1 of 2 1 2 LastLast
Results 1 to 10 of 19
  1. #1
    Fast & Loud meeper's Avatar
    Join Date
    Jul 2005
    Location
    West Grove, PA
    Posts
    5,019
    +1
    54

    2006 RXT Parts needed

    I have a customer looking for PTO housing, both case halves (engine block) and a crankshaft, let me know what you got!


  2. #2
    Joe Stang's Avatar
    Join Date
    Aug 2008
    Location
    Durham, CT
    Posts
    1,928
    +1
    61
    Have case here but needs a bore (rain water rust from sitting from previous owner.

  3. #3
    Fast & Loud meeper's Avatar
    Join Date
    Jul 2005
    Location
    West Grove, PA
    Posts
    5,019
    +1
    54
    I think the guy found a 255 motor

  4. #4

    Join Date
    Feb 2012
    Posts
    663
    +1
    45
    I have it all if joe does not

  5. #5
    Fast & Loud meeper's Avatar
    Join Date
    Jul 2005
    Location
    West Grove, PA
    Posts
    5,019
    +1
    54
    Chris, the parts you sent are no good to anyone, crankcase was from a motor that threw a rod for sure, hole in bottom and huge broken section out of the inside bracing, not to mention the scoring on one of the main bearing surfaces, two out of three pistons & rods showed up, one of the rods missing a bolt even

    the PTO was from a 155hp model and we specifically needed one from a supercharged application, oil pump is also very hard to spin by hand, didnt even bother taking it apart

    the crank i could not even trust if it was from a 155 motor either

    hopefully you will rectify the situation with the customer

  6. #6

    Join Date
    Feb 2012
    Posts
    663
    +1
    45
    Please call me
    203-218-5413...

    Hole in block? Where ?
    Didnt see any???
    Considering that crank spins good and came from a 215 100%.
    And I just threw in the two pistons for free...
    You bought a block and crank, and I sent a motor with pistons in it, just didn't have time to take it apart and I said is that ok to send w pistons and you had no problem at all with that...
    i have 6 more blocks here..
    Just call and il get you a new one out as soon as this one comes back.
    All you have to do is call. I'm here 10am-5pm daily. Just give a call happy
    to send a new one to ya. Thanks.

    Please call next time prior to posting. Much easier to rectify the situation. Thanks!!


  7. #7
    Fast & Loud meeper's Avatar
    Join Date
    Jul 2005
    Location
    West Grove, PA
    Posts
    5,019
    +1
    54
    then maybe the one you picked out to send is not what was sent, the hole and broken section of block bracing is very obvious and the scoring around one of the middle crank bearing surfaces is really bad, crank had some serious burn marks on it too

    sorry to blow this up but i can't even believe these parts were not already in the trash where they belong

  8. #8
    Moderator beerdart's Avatar
    Join Date
    Aug 2006
    Location
    CT
    Posts
    25,930
    +1
    1,407
    Pics?

  9. #9

    Join Date
    Feb 2012
    Posts
    663
    +1
    45
    Maybe one of my guys grabbed the wrong one. I don't know.

    Anyways as as I said prior, all you have to do is call me

    i am not going to go back and forth here as it's just going to take longer and just want to get the customer happy and back on the water as fast as possible.

    So the sooner you can call the better that way I can get the gentlemen back up and going again. Il await the call and in the mean time package up a second set of cases etc. Just give a call when you can so I can get this shipped.
    Thanks again for bringing it to my attention so I can take care of it right away for the guy!!

  10. #10

    Join Date
    Feb 2012
    Posts
    663
    +1
    45
    Yes please send me photos too. Again one of the guys may have grabbed wrong block. There's a lot going on at once here. And all the blocks are similar.

    Please just send me photos so I can confirm

    and I apologize in advance if a mistake was made, we are all human. I can't blame the guys if they made one mistake in the past 500 shipments.
    I do apologize and as I said above just call me and il get the new one shipped right away. Just need the shipping information please and il be sure to get it out to you express. In addition I will send you the funds for the return shipping, and additional funds if you need packing material or a new box etc. And let me know what time is good il schedule shipping company to pick it up right from your location so you do not have to even drop it off.

    edit-11pm still awaiting a call or any pics from meeper.
    Heading to sleep but please call or email photos tomorrow morning. Thanks
    Last edited by ChrisFiore15; 08-20-2014 at 09:58 PM.

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. WTB - Parts 2006 RXT ECU Needed
    By Chasing_the_Sun in forum Sea Doo Classifieds
    Replies: 2
    Last Post: 09-15-2015, 02:49 AM
  2. FS - Parts 2006 RXT Parts for Conversion Ski
    By MR-1 X 2 in forum Sea Doo Classifieds
    Replies: 1
    Last Post: 07-04-2014, 06:12 PM
  3. WTB 06 RXT Parts Needed
    By Bobman13 in forum Sea Doo Classifieds
    Replies: 3
    Last Post: 03-24-2014, 07:12 AM
  4. WTB - Parts 2005 RXP RXT parts needed
    By Lvnspeed in forum Sea Doo Classifieds
    Replies: 5
    Last Post: 10-16-2012, 08:27 AM
  5. FS 2006 RXT Part OUT
    By meirvin in forum Sea Doo Classifieds
    Replies: 31
    Last Post: 01-24-2010, 09:43 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •