Results 1 to 8 of 8
  1. #1
    kkgregs's Avatar
    Join Date
    Oct 2006
    Location
    San Pedro Ca 90732
    Posts
    94

    04 rxp valves question

    When replacing the stock valves with new valves , do you need new springs too ,
    and what kind of valves do you recommend,


  2. #2
    No springs needed. Super tech seem the goods.

  3. #3
    canuck's Avatar
    Join Date
    May 2006
    Location
    The wet left coast.
    Posts
    1,089
    +1
    108
    I used Supertechs in my 04 RXP and 05 GTX.

    I did not replace the springs as I have no plans to increase the rev limiter if you have future plans to increase rpm then now is the time to do springs as well. You will need at minimum a new head gasket and rocker shaft bolts, manual says head bolts can be reused I used ARP studs in the RXP and new oem bolts in the GTX. You should install new valve seals as well.

  4. #4
    kkgregs's Avatar
    Join Date
    Oct 2006
    Location
    San Pedro Ca 90732
    Posts
    94
    can i just replace the exhaust valves , or should i replace all of them , the intake looks good , just the exhaust in 1 and 2 cylinders

  5. #5
    kkgregs's Avatar
    Join Date
    Oct 2006
    Location
    San Pedro Ca 90732
    Posts
    94
    how do you order from super tech
    da void the question
    Last edited by kkgregs; 08-07-2014 at 08:03 PM.

  6. #6
    kkgregs's Avatar
    Join Date
    Oct 2006
    Location
    San Pedro Ca 90732
    Posts
    94
    just orderd some valves from green hulk , any advice

  7. #7
    canuck's Avatar
    Join Date
    May 2006
    Location
    The wet left coast.
    Posts
    1,089
    +1
    108
    Here's the part one video when I did the GTX, part two is on our Youtube site.


  8. #8
    kkgregs's Avatar
    Join Date
    Oct 2006
    Location
    San Pedro Ca 90732
    Posts
    94
    just orderd some valves from green hulk , any advice

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. adding depth to 04 RXP...weird question...
    By Nj05nismo in forum 4-Tec Performance
    Replies: 5
    Last Post: 09-20-2010, 07:56 AM
  2. First Post 04 RXP Valve
    By RYANFIG in forum 4-Tec Performance
    Replies: 3
    Last Post: 08-29-2010, 07:58 PM
  3. 03 GTX / 04 RXP Impeller Question
    By Zanerica in forum 4-Tec Performance
    Replies: 0
    Last Post: 09-18-2009, 12:55 PM
  4. 04 RXP Value Question
    By SpeedshifterZ06 in forum Sea Doo Open Discussion
    Replies: 4
    Last Post: 05-29-2009, 09:57 PM
  5. WTB: (2) 04 RXP Valve Cover Bolts
    By dsolie in forum Sea Doo Classifieds
    Replies: 2
    Last Post: 02-20-2009, 01:19 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •