Results 1 to 4 of 4
  1. #1

    SLTH 700 Engine Rebuild Bolt Sizes Lengths etc.

    I purchased a 1999 SLTH 700 with a blown and disassembled motor for a good price and have obtained a rebuilt motor for it. I am now in the process of assembling the motor using the Service Manual to guide me.
    The problem I am having is that all of the bolts etc. are in a bucket and I am not sure which bolts go where.
    For example, for the starter housing there are four bolts. The Parts Manual (p. 28 attached) says 14 7516723 4 Screw but doesn't say the size or length. The service manual says to torque them at 22 ft. lbs.

    Is there any place that lists the bolt sizes or lengths? There are a lot of bolts in that bucket.

    Thanks in advance.
    Attached Files Attached Files

  2. #2
    BlueFishCrisis's Avatar
    Join Date
    Aug 2011
    Medina, Ohio, United States
    If you were to group them together by size, and take a clear photo with all of them in frame, I am sure someone could rattle off what each are for just by looking at them. I know I could if it were a Fuji Motor.....
    Last edited by K447; 08-12-2014 at 08:17 AM.

  3. #3
    Bdesim's Avatar
    Join Date
    Aug 2012
    Post pics of the bolts. I can tell you where each goes by looking at them. I have rebuilt 3 700s in the past month

  4. #4
    Thanks for your offer. So far, I have been able to figure them out, based on the number required and then finding the lengths that work.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. flywheel bolt size? 99 polaris slth 700 red engine.
    By 250super in forum Polaris Open Discussion
    Replies: 9
    Last Post: 06-13-2012, 09:21 AM
  2. battery ground cable engine bolt size?
    By STSPERFORMANCE in forum Sea Doo Open Discussion
    Replies: 3
    Last Post: 01-25-2010, 02:31 PM
  3. 1999 Polaris SLTH starter bolt size?
    By igeoff in forum Polaris Open Discussion
    Replies: 1
    Last Post: 09-12-2008, 08:41 PM
  4. Bolt Size, thread, length for 2" Spacer Mounting?
    By ARNYGOLLOTT3 in forum Yamaha PWC Performance (2-stroke)
    Replies: 3
    Last Post: 05-17-2008, 09:50 AM
  5. pump bolt size and length
    By ugadawg131 in forum Polaris Open Discussion
    Replies: 7
    Last Post: 03-09-2007, 12:30 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts