Thread: Gonna run my 15/19R this weekend
04-05-2007, 03:37 PM #1
Gonna run my 15/19R this weekend
Lets see how it works on my S2 setup.
Here's a pic of the inner hub for those that want to compare it to the skat 15/19.
I'm seeing 8260+ with my 13/19 now so I hope this works out.
If this prop is too tall would I be better off tweaking it or go to an 84mm ring?
04-05-2007, 04:06 PM #2
You will have to tweak it to get the R's just right but run it first to get a baseline.
04-05-2007, 04:18 PM #3
04-05-2007, 05:19 PM #4
after tweaking these impellers you often have to file down the outside to make it fit...so what happens if you pitch it once, have to file it down, add performance, and then have to pitch it the opposite way. do you need a new impeller? because i would think after filing and then re-bending there would be excess clearance because of the diameter being smaller than completely stock. and we all know that the skis dont run at max performance when there isnt proper clearance..
04-05-2007, 05:20 PM #5
I see the difference now...hmmm
I will probably be testing my Skat 15/19 this monday...
04-05-2007, 05:36 PM #6
04-05-2007, 05:36 PM #7
04-05-2007, 05:41 PM #8
04-05-2007, 06:41 PM #9
- Join Date
- Apr 2005
- Augusta GA
Jim Put the thing on and run it. As you know that is what i had first but love it after the repitch.
04-05-2007, 06:44 PM #10
I use a 4" grinder with a conditioning pad on it. I just barely pass it on the trailing edges until the prop drops into place.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By obiwan in forum Honda PerformanceReplies: 63Last Post: 03-20-2012, 10:22 PM
By broadsword in forum SoutheastReplies: 6Last Post: 07-21-2011, 11:24 AM
By ModularJunk in forum Jersey RidersReplies: 6Last Post: 08-25-2008, 08:21 PM
By 07scRXP in forum NortheastReplies: 2Last Post: 06-25-2007, 09:38 AM
By MikeTrin in forum 4-Tec PerformanceReplies: 13Last Post: 05-10-2005, 03:23 PM