Results 1 to 2 of 2
  1. #1

    Join Date
    Aug 2006

    Anybody else using a VX prop on a GPR

    If so what nozzle are you using? I have pitched down the VX prop a couple of times and still am not getting the rpm I think I should on 1390 GPR/big hub pump/85 nozzle. Thinking to trying 87 nozzle but everybody says that is not the ticket on a big hub pump, but maybe it is with a VX mod prop.

  2. #2
    Prism's Avatar
    Join Date
    May 2007
    "New" Jersey
    I have a prop done by Impros. Its a YH-CD 15/22. The hub size is large. (05 and up pump) I mention that because I'm not sure if a stock VX is large hub or not. Anyway, its been used with great success with an 88mm nozzle. I should also mention I bought both from forum member N8R who went 84+ with them.
    Last edited by Prism; 08-21-2014 at 08:16 AM. Reason: Additional info

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. what prop could i use on my gpr
    By herbie1222 in forum Yamaha Projects & Build Threads
    Replies: 1
    Last Post: 11-13-2012, 07:05 AM
  2. Have Anybody Used A 11/14 Prop On A Xl1200 Limited
    By Fabian_1 in forum Yamaha PWC Performance (2-stroke)
    Replies: 4
    Last Post: 09-23-2008, 08:50 AM
  3. Anybody else miserable riding 2-up on a GPR?
    By red rider in forum Yamaha Open Discussion
    Replies: 34
    Last Post: 09-07-2007, 05:46 PM
  4. Anybody using the spray skirt on their GPR?
    By jpa1300 in forum Yamaha PWC Performance (2-stroke)
    Replies: 16
    Last Post: 08-18-2007, 06:02 AM
  5. Jetting - Anybody using unported 1300 cylinders on a GP1200R?
    By philip_gpr in forum Yamaha PWC Performance (2-stroke)
    Replies: 1
    Last Post: 08-11-2006, 08:39 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts