Page 1 of 2 1 2 LastLast
Results 1 to 10 of 15
  1. #1

    Prop pitch suggestions for a C-1 wheel.

    Just looking for prop pitch suggestions from you guys that have run the R-3/ C-1 wheel combo. I have all the supporting mods, but will be using a SVHO intercooler. I want to go with a Skat prop.


  2. #2
    Yellow93's Avatar
    Join Date
    Apr 2006
    Location
    San Antonio, Texas, United States
    Posts
    2,429
    +1
    122
    What is your target RPM's and what nozzle are you running?

  3. #3
    AWA MEMBER
    Join Date
    Jan 2008
    Location
    Currituck, North Carolina, United States
    Posts
    4,616
    +1
    247
    I ran a 12/22 stock repitched and it worked pretty good

  4. #4
    powerstroke specialist mikegp's Avatar
    Join Date
    Mar 2011
    Posts
    2,529
    +1
    190
    true 13/22 skat will get you close to 77 and strong mid acceleration. thats the prop i was running with that wheel. the solas 13/22 probably be close to the skat . i still have the one a remove from the ski ,almost new but it was promise to ccw , just waiting on him. if he doesn't want it , then i will let you know.

  5. #5
    Thanks guys. So a 12 or 13/22 should do it.

  6. #6
    SpeedJunky's Avatar
    Join Date
    Dec 2005
    Location
    Michigan
    Posts
    1,118
    +1
    35
    I have run a 13/22 and been happy with it. 8200-8300 rpm
    Ran a 13/21 and found better accel and response. 8500+rpm.
    Big problem that I feel is the C-1 wheel doesn't make more power past the 8300rpm mark.
    I like the 13/22.
    You have to consider nozzle diameter also. Above rpm are with a 2014 FZR 8 vein 85.5mm nozzle.

  7. #7
    pwc4life's Avatar
    Join Date
    Sep 2010
    Location
    Earth
    Posts
    375
    +1
    24
    Quote Originally Posted by SpeedJunky View Post
    I have run a 13/22 and been happy with it. 8200-8300 rpm
    Ran a 13/21 and found better accel and response. 8500+rpm.
    Big problem that I feel is the C-1 wheel doesn't make more power past the 8300rpm mark.
    I like the 13/22.
    You have to consider nozzle diameter also. Above rpm are with a 2014 FZR 8 vein 85.5mm nozzle.
    He's running an SVHO intercooler vs your Riva intercooler, so I would think his RPM would be lower than yours with the 13/22. How much lower I don't know.

  8. #8
    AWA MEMBER
    Join Date
    Jan 2008
    Location
    Currituck, North Carolina, United States
    Posts
    4,616
    +1
    247
    12/22 should yield pretty decent results 13/22 would work with a bigger nozzle

  9. #9
    powerstroke specialist mikegp's Avatar
    Join Date
    Mar 2011
    Posts
    2,529
    +1
    190
    I believe he got 87mm nozzle , that's why I think 13/22 will do the job.

  10. #10
    The Ski is a 2010 FX SHO, I'm running a stock nozzle. I hope that helps.

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Rxp 300 prop pitch and s/c drop in wheel
    By Styler690 in forum 4-Tec Performance
    Replies: 22
    Last Post: 06-16-2016, 07:38 PM
  2. Prop Pitch Suggestions
    By Gateway Tone in forum Yamaha PWC Performance (4-stroke)
    Replies: 19
    Last Post: 05-27-2015, 04:36 PM
  3. what twin prop pitch ? for ET 15 wheel
    By isa alnoaimi in forum Yamaha PWC Performance (4-stroke)
    Replies: 7
    Last Post: 12-18-2014, 03:54 PM
  4. Replies: 19
    Last Post: 02-08-2012, 11:23 AM
  5. Prop pitches for max speed and performance
    By 2fast4u in forum Yamaha PWC Performance (2-stroke)
    Replies: 5
    Last Post: 11-05-2006, 01:48 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •