08-24-2014, 07:35 PM #1
Reattached Manifold now just beeping...
Removed my manifold to clean it out. Put it back in and plugged everything up. Switch my fuel injectors to the 42lb (for the x wheel). When I plugged in the fuel hose to the fuel rail it started making funny noises like it was putting pressure back. I didn't even start it and it start buzzing inside the engine(I think my relay). The seadoo was turned on without me putting the key in. I have to disconnect the battery. When I start to hook back the batter it's live and tries to turn on.
If I put the key in to start it, it does nothing.
It's on but the HUD display isn't powered up. My RXT is possessed.
What do I need to do , finally got in the X charger and my ski is whining at me.
Do I have to take it to the dealership to do something to the ECU after switching injectors ?
08-24-2014, 07:45 PM #2
are you sure you have the tops switch and the IAT plugs on the right spot
they both are ev1 connectors like the injectors
08-24-2014, 08:12 PM #3
I spent about 6 hours in the 95 degree heat today putting the seadoo back together and had the 2 big plugs on the top of the manifold (ECU I think) backwards...
No beep and started up like a champ. Man that X charger was wizzing. Can't wait to get the bow tied up on this thing and get in the water...
08-24-2014, 08:21 PM #4
the ecu plugs are marked......
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By ou812 in forum 4-Tec PerformanceReplies: 7Last Post: 06-22-2013, 08:57 AM
By jamesbern in forum 2-Stroke PerformanceReplies: 5Last Post: 04-18-2012, 07:19 PM
By Tatorsalad in forum 2-Stroke PerformanceReplies: 11Last Post: 07-13-2008, 08:27 AM
By boostaholic in forum 4-Tec PerformanceReplies: 12Last Post: 05-30-2008, 09:15 AM
By codemanrose in forum Yamaha Old School SkisReplies: 42Last Post: 04-14-2007, 10:21 PM