Results 1 to 6 of 6
  1. #1

    2001 gpr 1200, how to know if pre-mix or not

    Picked up a 2001 gpr 1200 from an older guy who bought it for his grandson, blew engine, on last break in gas. He didn't know if oil had blovked off on it or not. Built by performance watercraft. Is there anyway I can tell? Without taking the ski apart I mean
    Thanks in advance


  2. #2

    Join Date
    Aug 2014
    Location
    Northern Ca
    Posts
    1
    I'm new to skis but there should be a block off plate on the pump which may be hard to see. A quick indicator could be to check if someone has short out the wires for the oil alarm.

  3. #3
    Good idea!

  4. #4
    Block off plate is hard to see, but if you have injection trace the lines off the oil tank down to the flywheel area and then thin ones going to your carbs.


  5. #5
    Almost's Avatar
    Join Date
    May 2010
    Location
    Cape May, NJ
    Posts
    778
    +1
    73
    Quote Originally Posted by chris1200 View Post
    Block off plate is hard to see, but if you have injection trace the lines off the oil tank down to the flywheel area and then thin ones going to your carbs.
    What he said, reach down through the front hatch and feel the bottom of the oil tank and see if there is still an oil line there. It's not full proof as the last person might not have removed all the oil lines but its a start.

  6. #6

    Join Date
    Jul 2014
    Location
    Canyon Lake, TX
    Posts
    307
    +1
    18
    I will snap a pic today, if you look between the exhaust and the engine you can see the top of the carbs, it should have little rubber caps over 1/8th inch nipples if its blocked off..

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. How to know if IC is faulty?
    By blkturbo! in forum 4-Tec Performance
    Replies: 19
    Last Post: 09-02-2012, 04:55 PM
  2. Yamaha 09 fzr 82 hours, how to know if clutch is bad or supercharged?
    By cuban133054 in forum Yamaha PWC Performance (4-stroke)
    Replies: 20
    Last Post: 07-31-2012, 05:43 PM
  3. How to know if RRFPR is *required*??
    By blkturbo! in forum 4-Tec Performance
    Replies: 13
    Last Post: 07-20-2011, 01:27 PM
  4. Replies: 17
    Last Post: 07-13-2011, 05:50 PM
  5. GP1300R, How to know if has Oil Injection Block-Off
    By jwaked in forum Yamaha PWC Performance (2-stroke)
    Replies: 17
    Last Post: 11-22-2010, 03:27 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •