Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 24
  1. #1

    1997 SL 700 dlx, magneto stator troubles?

    ok, i have searched until my eyes are bleeding. tons and tons of really good info here. glad i found this place.

    now my question. i am totally confused almost more now than i was before. i have done the trouble shooting and think i have it narrowed down to a bad stator. my problem now is which stator do i need?
    i have found way too many part numbers for stators and i am so confused.
    can i please get the correct part number for the stator i need so i can get it before summer is over lol.

    i have the black potted cdi and the red potted single coil with two plug wires if that helps.

    thanks,
    travis
    Last edited by K447; 08-31-2014 at 06:38 PM.


  2. #2
    oh, and what do i need to get the flywheel off?

  3. #3
    Click avatar for tech links/info, donation request K447's Avatar
    Join Date
    Jul 2007
    Location
    near Toronto, Canada
    Posts
    36,589
    +1
    1,273
    What part numbers are on the CDI?

    If there is a hand written number on either side, post that too.

    To remove the flywheel you will need a stout puller. Easier to do with the engine out, possible to do with engine still in the hull.

  4. #4
    thanks for the reply.
    yes there is a hand written number and i don't have that at this time. the pwc is at a friends house at the lake an hour away. i do remember that a number was colored over with a yellow marker and a new number written in the same yellow on the outside. does that help lol.

  5. #5
    The part number is, 4010449

  6. #6
    Click avatar for tech links/info, donation request K447's Avatar
    Join Date
    Jul 2007
    Location
    near Toronto, Canada
    Posts
    36,589
    +1
    1,273
    Quote Originally Posted by thebulletman View Post
    The part number is, 4010449
    Hand written or factory stamped?

  7. #7
    Hand written in yellow paint pen

  8. #8
    I have a pic. Don't know how to upload it.

  9. #9
    Click avatar for tech links/info, donation request K447's Avatar
    Join Date
    Jul 2007
    Location
    near Toronto, Canada
    Posts
    36,589
    +1
    1,273
    Quote Originally Posted by thebulletman View Post
    The part number is, 4010449
    This would be the part number for the upgraded Gen III CDI, so your engine will have the Gen III ignition upgrade stator for the two cylinder engine.

  10. #10
    Can I trouble you for the stator part number please. Thanx

Page 1 of 3 1 2 3 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 1997 sl 1050 CDI and stator
    By ls1 nova in forum Polaris Open Discussion
    Replies: 3
    Last Post: 09-03-2015, 01:36 PM
  2. put a 97 slt 780 3cyl engine into a 1997 sl 700 2cyl hull?
    By billwaldo in forum Polaris Open Discussion
    Replies: 1
    Last Post: 03-11-2015, 11:15 AM
  3. 1997 sl 700 dies at full throttle
    By kaotic1 in forum Polaris Open Discussion
    Replies: 11
    Last Post: 08-04-2014, 02:07 PM
  4. SL 700 DLX Battery Drain issues
    By tcschrader in forum Polaris Open Discussion
    Replies: 12
    Last Post: 06-18-2009, 11:28 PM
  5. 97 SL 700 No Spark Fried Stator WTB Stator
    By DennisM in forum Polaris Open Discussion
    Replies: 0
    Last Post: 07-02-2007, 12:44 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •