08-31-2014, 01:38 PM #1
Aww crap! Need help! broke off plug in head!
Was putting new plugs in, and tightening down the new plug (cr9eix) and it literally snapped off in the head. There are 3 threads left on plug. Is there an extraction tool? I didn't want to use these plugs, but that is all the dealer had. I usually use the ek's. I know it shouldn't matter, but every time I use an iridium something bad happens. I didn't tighten these down very hard at all.
08-31-2014, 04:08 PM #2
Should be an easy fix try an easy out or even a flat blade screwdriver it should be loose still.
08-31-2014, 06:36 PM #3
Ya it came out really easy. I used a bolt extractor. Guess I was panicking lol. When it first twisted, I thought I stripped the head out....talk about panic. I went to autozone and got the ek's. Went in with no problem.
08-31-2014, 07:22 PM #4
- Join Date
- May 2008
- Elephant Butte New Mexico
very fortunate indeed
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By Renzo778 in forum Sea Doo Open DiscussionReplies: 6Last Post: 07-06-2014, 10:19 PM
By lost_dogg in forum 4-Tec PerformanceReplies: 3Last Post: 09-07-2013, 01:51 PM
By seadooRXP2590 in forum 4-Tec PerformanceReplies: 3Last Post: 05-17-2007, 09:43 PM
By Water4fire in forum 4-Tec PerformanceReplies: 32Last Post: 04-26-2007, 10:38 PM
By ybnormal in forum Yamaha PWC Performance (2-stroke)Replies: 30Last Post: 04-02-2006, 04:21 PM