Page 1 of 14 1 2 3 11 ... LastLast
Results 1 to 10 of 139
  1. #1

    Candoopro announces sales of the GPS Speedometer Modules

    We realize that many of you have had an interest in our GPS Speedometer Module for quite some time. It has taken far longer than we would have liked to bring this to market, the primary reason is that we have been swamped for the last 6-8 months developing a new diagnostic system for the Marine market. The good news is that we will start shipping the GPS Modules this week. Jerry will have them up in the store later this week, but here is a rundown of the key features:

    1. The GPS Module is "plug and play", requires no cutting or splicing of any harness wires for the standard unit.
    2. It uses the latest SirfSTAR IV chipset, which has the best doppler speed algorithm in the market of any GPS chipset.
    3. The unit is totally potted and sealed for the marine environment.
    4. It uses a patent-applied for method of calibration to your individual ski via magnetic sensors, no external wires or switches to fail.
    5. It uses a unique method to indicate satellite lock, as well as using the same indication to validate calibration.
    6. It uses no power from the battery when not in use, so battery drain while off is not a concern.
    7. It contains a supercapacitor to store the GPS receiver coordinates for several hours after you shut down the ski, so you can expect almost instantaneous acquisition of the satellites when you get back running.
    8. It is designed for harsh electrical vehicle noise, with overvoltage protection, and reverse voltage protection. You can even hook up the power connections to the battery backwards without damaging the unit.

    We will have two units available for Sea Doo watercraft:

    1. Standard unit for most Sea Doo watercraft built since 1999 with the lake temp sensor (3 wire speedo sender plug) Installation of the unit retains your lake temp sensor. Simply unplug the existing speedo sending unit, and insert the Candoopro GPS module connector assembly inline. Two extra wires are connected via ring terminals to the battery. Calibrate and go. Unit is priced at $119.

    2. Same as above, but with external pulse output for logging, for CMD and other systems. Unit is priced at $139.

    We also have versions available for Yamaha Waverunners and Kawasaki Jet Skis, with and without pulse logging output.

    We will let everyone know when Jerry has them up in the PWCPerformance store.

    Jeff

    Click image for larger version. 

Name:	GPS Speedo.jpg 
Views:	878 
Size:	73.4 KB 
ID:	340238


  2. #2
    Quote Originally Posted by CANDooPro View Post
    We realize that many of you have had an interest in our GPS Speedometer Module for quite some time. It has taken far longer than we would have liked to bring this to market, the primary reason is that we have been swamped for the last 6-8 months developing a new diagnostic system for the Marine market. The good news is that we will start shipping the GPS Modules this week. Jerry will have them up in the store later this week, but here is a rundown of the key features:

    1. The GPS Module is "plug and play", requires no cutting or splicing of any harness wires for the standard unit.
    2. It uses the latest SirfSTAR IV chipset, which has the best doppler speed algorithm in the market of any GPS chipset.
    3. The unit is totally potted and sealed for the marine environment.
    4. It uses a patent-applied for method of calibration to your individual ski via magnetic sensors, no external wires or switches to fail.
    5. It uses a unique method to indicate satellite lock, as well as using the same indication to validate calibration.
    6. It uses no power from the battery when not in use, so battery drain while off is not a concern.
    7. It contains a supercapacitor to store the GPS receiver coordinates for several hours after you shut down the ski, so you can expect almost instantaneous acquisition of the satellites when you get back running.
    8. It is designed for harsh electrical vehicle noise, with overvoltage protection, and reverse voltage protection. You can even hook up the power connections to the battery backwards without damaging the unit.

    We will have two units available for Sea Doo watercraft:

    1. Standard unit for most Sea Doo watercraft built since 1999 with the lake temp sensor (3 wire speedo sender plug) Installation of the unit retains your lake temp sensor. Simply unplug the existing speedo sending unit, and insert the Candoopro GPS module connector assembly inline. Two extra wires are connected via ring terminals to the battery. Calibrate and go. Unit is priced at $119.

    2. Same as above, but with external pulse output for logging, for CMD and other systems. Unit is priced at $139.

    We also have versions available for Yamaha Waverunners and Kawasaki Jet Skis, with and without pulse logging output.

    We will let everyone know when Jerry has them up in the PWCPerformance store.

    Jeff

    Click image for larger version. 

Name:	GPS Speedo.jpg 
Views:	878 
Size:	73.4 KB 
ID:	340238
    So will this be Plug & Play for Bosch I-Control ski's to allow for CMD speed logging, via +5v CMD input?

  3. #3
    No, sorry, not without modification. This version is for ski's that have the paddle wheel speed input, which is most skis up to 2010 with the Siemens system.

    You could easily adapt the Yamaha version to simply switch it on with power, and use the output to drive the CMD input. But there would be some cutting of wires.

  4. #4
    Moderator Snoman's Avatar
    Join Date
    Apr 2006
    Location
    South Chicagoland
    Posts
    14,688
    +1
    846
    Awesome!!!!!So this means real speedo reading and no more 70 mph top speed speedo readings.....Sweet

  5. #5
    shrabber's Avatar
    Join Date
    Apr 2008
    Location
    Jacksonville, FL
    Posts
    5,305
    +1
    376
    Cool, like How You Idenified seadoo from Yamaha.

    Very nice stuff as always...

    seadoo part # 615 -80mph
    yamaha part # 616 +85mph


  6. +1 by:


  7. #6
    SplishSplash's Avatar
    Join Date
    May 2006
    Location
    Belle River Ont Canada
    Posts
    1,185
    +1
    98
    Quote Originally Posted by Snoman View Post
    Awesome!!!!!So this means real speedo reading and no more 70 mph top speed speedo readings.....Sweet

    Does it? or will it still top out at 70 regardless of how fast. I don't think the 70 limitation was the water wheel, that this replaces, but the dash.

  8. #7
    True, but for our customers in the US, you simply switch the cluster to metric mode, and recalibrate the KMH reading to the MPH value. The cluster will display up to 112 MPH that way.

    Quote Originally Posted by SplishSplash View Post
    Quote Originally Posted by Snoman View Post
    Awesome!!!!!So this means real speedo reading and no more 70 mph top speed speedo readings.....Sweet

    Does it? or will it still top out at 70 regardless of how fast. I don't think the 70 limitation was the water wheel, that this replaces, but the dash.

  9. #8
    Bob 1tommygunner1927's Avatar
    Join Date
    Apr 2007
    Location
    Houston, Texas
    Posts
    6,381
    +1
    984
    The dash will display over 112 kph....which equals 70 mph?

  10. #9
    Boost addict hotbird's Avatar
    Join Date
    Jul 2011
    Location
    Southern WI
    Posts
    5,503
    +1
    681
    Quote Originally Posted by 1tommygunner1927 View Post
    The dash will display over 112 kph....which equals 70 mph?
    They are using the metric number to fool the dash into displaying a higher than 70 mph number but this higher number will be in mph.

  11. #10
    Site Admin Green Hulk's Avatar
    Join Date
    Apr 2005
    Location
    Morgan City, LA
    Posts
    36,398
    +1
    2,524
    Quote Originally Posted by CANDooPro View Post
    We will let everyone know when Jerry has them up in the PWCPerformance store.

    Jeff

    Thank you Jeff and thank you for your hard work with this!

    Guy's I have been using this module on both my Yamaha and Kawasaki skis for nearly 6 months now. It works flawlessly and is extremely easy to install.

    These are now ready to be ordered!


    CandooPro GPS Speedometer Modules

    The GPS Module is "plug and play", requires no cutting or splicing of any harness wires for the standard unit. Transforms your skis inaccurate speedometer into a very accurate GPS Speedometer. The CandooPro GPS Speedometer uses the latest SirfSTAR IV chipset, which has the best doppler speed algorithm in the market of any GPS chipset.
    The unit is totally potted and sealed for the marine environment.
    Uses a patent-applied for method of calibration to your individual ski via magnetic sensors, no external wires or switches to fail.
    Uses a unique method to indicate satellite lock, as well as using the same indication to validate calibration.
    Uses no power from the battery when not in use, so battery drain while off is not a concern.
    Contains a supercapacitor to store the GPS receiver coordinates for several hours after you shut down the ski, so you can expect almost instantaneous acquisition of the satellites when you get back running.
    Designed for harsh electrical vehicle noise, with overvoltage protection, and reverse voltage protection. You can even hook up the power connections to the battery backwards without damaging the unit. Please note: All Candoo products are drop shipped directly from the manufacturer.

    Product Image Item Name- Model Price
    GPS Module for Sea Doo watercraft

    GPS Module for Sea Doo watercraft with lake temp sensor (3-wire sender used on most skis built since 1999).
    9501 $119.00

    GPS Module for Sea Doo watercraft with Dynojet CMD

    GPS Module for Sea Doo watercraft with lake temp sensor, with pulse output for speed logging with CMD or other systems
    9502 $139.00

    GPS Module for Yamaha Waverunners

    GPS Module for Yamaha Waverunners, most models, except 2006 and newer FX Cruiser models.
    9503 $119.00

    GPS Module for Yamaha Waverunners with Dynojet CMD

    GPS Module for Yamaha Waverunners, except 2006 and newer FX Cruiser models, with pulse output for speed logging with CMD or other systems
    9504 $139.00

    GPS Module for most Kawasaki Jet Skis built since 1999

    GPS Module for most Kawasaki Jet Skis built since 1999
    9505 $119.00

    GPS Module for most Kawasaki Jet Skis built since 1999 with Dynojet CMD

    GPS Module for most Kawasaki Jet Skis built since 1999, with pulse output for speed logging with CMD or other systems.
    9506 $139.00


Page 1 of 14 1 2 3 11 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. How To Install a GPS Speedometer Module (CanDooPro)
    By 3ftDeep in forum Videos & Pictures
    Replies: 4
    Last Post: 02-11-2016, 03:49 PM
  2. How To Install a GPS Speedometer Module (CanDooPro)
    By 3ftDeep in forum Sea Doo Open Discussion
    Replies: 2
    Last Post: 02-03-2016, 01:32 PM
  3. FS 2013 FZR for sale at the end of the Season
    By David_HX_RXP in forum Yamaha 4 Stroke Skis
    Replies: 6
    Last Post: 01-29-2014, 08:36 PM
  4. FS for sale lightweight hull yamaha FZR with the bottom of the rxp-x (T3)
    By petroracing.kitins in forum Yamaha Classifieds
    Replies: 15
    Last Post: 12-08-2013, 07:54 PM
  5. 2007 RXP Sale Of The Year
    By REID2168 in forum Sea Doo 4Tec Skis
    Replies: 32
    Last Post: 08-26-2008, 12:36 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •