Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 25
  1. #1
    Resident Jicky Jack Jeff C's Avatar
    Join Date
    May 2005
    Location
    Twin Cities, MN
    Posts
    1,153

    Need advice on fuel pump for rxp

    2004 Rxp with 440 hours on it. Stock motor.

    It would not start, so I brought it in to my dealer. He said he checked the fuel pump and it is bad.

    quoted me $577 for the fuel pump assembly, plus labor.

    I told him I would come and get it and source the part on my own.

    I need to find a fuel pump, have any ideas ?

    Also, it look pretty easy to get that assembly out of there excpet for that quick connect connector from the pump to the injectors. how do I get that sucker off there?


  2. #2
    Moderator Snoman's Avatar
    Join Date
    Apr 2006
    Location
    South Chicagoland
    Posts
    14,688
    +1
    846
    Walbro GSS342

    http://www.summitracing.com/parts/vpn-gss342bx



    As long as your replacing the fuel pump you may want to replace the filters also...

    outer fuel filter:
    http://www.summitracing.com/search/?keyword=FS242&dds=1

    inner fuel filter:
    http://www.summitracing.com/search/?keyword=FS220&dds=1
    Last edited by Snoman; 09-02-2014 at 01:30 PM.

  3. +1 by:


  4. #3
    Work Harder, Millions on Wellfare Depend On Us! ultramaxracing05's Avatar
    Join Date
    Aug 2009
    Location
    Beaumont, Texas
    Posts
    2,999
    +1
    123
    if you are in a pinch, I have a stock fuel pump off a 2012 rxpx. It got like 40 hrs on it. I can let it go for $50 shipped.

  5. #4
    There is very few dealers I trust especially large ones ,There is too many people from service writer to service manager ,then finally mechanic.Its possible fuel pump is bad ,Remove the high pressure hose with a 2.00 fuel injector connection remover from auto parts or use a small set of needle nose pliers inserting each side under the plastic strips on each side of connector .Did you check fuel pump pressure? or grounds for corrosion,There is many things a seadoo Buds system can detect,yet there is many things that need just mechanical ability.If you are not real comfortable with your mechanical ability find someone who is or a dealer where you can talk to mechanic(very few).If your mechanical ability is good you can find most answers here or on web.First off use seadoo online shop manuals,and this forum,searches can and do help here,Have a great day>Marvin

  6. #5
    Resident Jicky Jack Jeff C's Avatar
    Join Date
    May 2005
    Location
    Twin Cities, MN
    Posts
    1,153
    Will the Rxpx 2012 fit on my 2004 RXP?

    Are the connections the same?

  7. #6
    Resident Jicky Jack Jeff C's Avatar
    Join Date
    May 2005
    Location
    Twin Cities, MN
    Posts
    1,153
    Snoman:

    WhenI go on the site and search for GSS342 walbro, it comes back with GSS342BX. Is that the same part?

  8. #7
    For 04 you have a full size Pump. For Jeff C the housings changed to the compact pump in 08. while you can stuff the larger pump into the plastic housing or cut out part, I opted for the correct size pump from DW (DW65, Aeromotive also has good stuff). Not sure why here but I'm in the performance car biz and the cheap guys buy the Walbro for their Hondas. We would never install a Walbro in the dozens of turbo and supercharged setups we sell. Failure rate is way too high. We cant have a customer car blow up, nor do I want my ski to.

  9. #8
    Resident Jicky Jack Jeff C's Avatar
    Join Date
    May 2005
    Location
    Twin Cities, MN
    Posts
    1,153
    Ok, I got the pump assembly unbolted, but I cannot seem to get it out, not enough room in there. From what I can see, the glove box would be a good spot to pull that assembly through to get it out. Am I on track or is there something else that someone has tried that worked.

  10. #9
    ou812's Avatar
    Join Date
    Jun 2006
    Location
    Riverside,ca
    Posts
    6,210
    +1
    198
    Yes, remove the glovebox
    Quote Originally Posted by Jeff C View Post
    Ok, I got the pump assembly unbolted, but I cannot seem to get it out, not enough room in there. From what I can see, the glove box would be a good spot to pull that assembly through to get it out. Am I on track or is there something else that someone has tried that worked.

  11. #10
    Yea you have that right, by removing the glovebox.

Page 1 of 3 1 2 3 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Need advice on bilge pump for 2014 RXTX
    By JohnW in forum 4-Tec Performance
    Replies: 2
    Last Post: 07-11-2014, 04:46 AM
  2. need advice on fuel for 260X on 15psi
    By drift in forum Kawasaki PWC Performance (4-stroke)
    Replies: 10
    Last Post: 05-02-2011, 07:06 AM
  3. need advice about fuel filter for 1200 gpr year 2000
    By noshowallgo in forum Yamaha PWC Performance (2-stroke)
    Replies: 2
    Last Post: 10-29-2008, 08:18 PM
  4. Need advice on mild mods for 04 RXP
    By dave911rsr in forum 4-Tec Performance
    Replies: 6
    Last Post: 03-02-2008, 09:19 PM
  5. Need opinion on fuel pump mount
    By gvnitup in forum Polaris How To & FAQs
    Replies: 10
    Last Post: 05-18-2007, 06:01 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •