Thread: Vibration out of no where.
09-01-2014, 09:55 PM #1
Vibration out of no where.
Ok last week had a issue with it would start. Found that problem. While find this problem I remove my cam sensor. Checked ohms. It was ok. I left it out checked my throttle body. Unplugged the tps and just tried to fire it up. It started right up. Seen oil come out the cam sensor hole so I shut it off ASAP. Checked my oil to see how much came out and it was barely on dip stick. I checked it before I did all this it was full. Now I don't think I lost that much oil at all out that hole but I filled it back up. Took it out this weekend now I got a vibration. Is there any way that oil is trapped some where it shouldn't be causing this. I checked intake grate prop wear ring all seem ok. Even pump bearing has no play. No water in the hull. I'm new to seadoos. I'm about to punt!
09-02-2014, 05:26 AM #2
09-02-2014, 05:52 AM #3
That's a good question. That would cause a vibration u think?
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By Rebcammaz in forum Polaris Open DiscussionReplies: 7Last Post: 05-21-2009, 08:29 PM
By doublerkid in forum 2-Stroke PerformanceReplies: 7Last Post: 09-01-2008, 08:35 PM
By throttlejunkie in forum Open DiscussionReplies: 0Last Post: 04-24-2008, 04:36 PM
By HallPass in forum Open DiscussionReplies: 17Last Post: 04-08-2008, 04:29 PM
By inteljd in forum 4-Tec PerformanceReplies: 2Last Post: 05-21-2006, 06:46 PM