Thread: Drilling the Hull
09-02-2014, 11:42 AM #1
Drilling the Hull
The front well drain on my 2010rxtx occasionally fills with water and nails me in the face when I ramp it up in chop. The right side drain in the footwell isn't adequate enough to drain it so I want to put a second in the left footwell. Am I asking for trouble drilling the hull in that location?
09-02-2014, 04:19 PM #2
I drilled a hole for a bilge outlet on that side.
You need a drilling machine with a 90 degree angle bit, because of the limited space in the footwell.
09-02-2014, 08:25 PM #3
Before you drill, I would check that drain line for an obstruction, like dirt...Blow thru the hose with compressed air..
09-03-2014, 02:57 PM #4
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By DrewNJ in forum Yamaha Open DiscussionReplies: 0Last Post: 12-07-2007, 05:57 PM
By omelfata in forum Sea Doo Open DiscussionReplies: 4Last Post: 08-15-2005, 02:39 PM
By Drake in forum 4-Tec PerformanceReplies: 2Last Post: 07-25-2005, 02:21 PM
By Pee2xUSee in forum 4-Tec PerformanceReplies: 16Last Post: 07-20-2005, 07:18 PM
By UFO-RXT in forum 4-Tec PerformanceReplies: 21Last Post: 07-18-2005, 09:46 PM