Results 1 to 2 of 2
  1. #1
    Ski Hacks MG's Avatar
    Join Date
    Apr 2013

    Anythign besides Yamalube 4-M in the SC lube port?

    What is a good alternative to 4-M in the supercharger lube port? Search feature wont find "4M".

  2. #2
    KamikazeGPR's Avatar
    Join Date
    Mar 2007
    yamaha waverunners use 4W, 4M is for outboards. I switched to amsoil marine at 10 hours, now at 180 hours and haven't looked back. I've had the charger off many times and don't bother with the lube port unless i've taken charger apart to change wheel or shaft.
    If you are going to lube the port, make sure to do it before putting air intake back on as you need to spin wheel by hand to feed the oil into port. I use a straw to feed oil, but I guess you can use an eye dropper or syringe as well.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. My Rubber (Cap for the IC Fogging Port) Keeps Falling Off
    By Spooling in forum Kawasaki Open Discussion
    Replies: 9
    Last Post: 06-18-2012, 08:05 PM
  2. Why does the #3 piston fry besides not getting oil from the carb (this is on a premix
    By macGruber in forum Yamaha PWC Performance (2-stroke)
    Replies: 3
    Last Post: 04-22-2012, 08:33 PM
  3. Replacing wear ring housing, can I use anything besides yamalube ?
    By richdash in forum Yamaha Open Discussion
    Replies: 3
    Last Post: 07-14-2010, 10:51 PM
  4. Replies: 0
    Last Post: 03-13-2009, 01:32 PM
  5. ??What Yamalube is the best for Pre-mix??
    By Heath GP1200 in forum Yamaha PWC Performance (2-stroke)
    Replies: 8
    Last Post: 08-07-2007, 03:52 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts