Results 1 to 4 of 4

Thread: Prop spinin out

  1. #1
    fastkaz's Avatar
    Join Date
    Jan 2007
    Location
    Cayman Islands/Orlando Fl
    Posts
    299

    Prop spinin out

    on my 2000 xl1200 my impeller is spinin out and eventualy hooks up and go...what can cause that propblem?


  2. #2
    KamikazeGPR's Avatar
    Join Date
    Mar 2007
    Location
    Philadelphia
    Posts
    1,361
    +1
    99
    My first guess would be your pump shoe needs to be sealed.The kits run about $60 from r&d and riva. I used the kit in my 06 gpr. Realized afterward there is a cheaper way to go. I just redid my 03 gpr last week using melted candle wax instead of the kit and 3m 4200 fast cure.$10 for the 4200 and an hours work.

    If the problem continues after shoe seal. It may be a worn impeller liner.Being a 2000,im sure its seen its use.

  3. #3
    fastkaz's Avatar
    Join Date
    Jan 2007
    Location
    Cayman Islands/Orlando Fl
    Posts
    299
    i look carefully today and in my stock intake grate one piece of it is broken...can that cause the prop to spin out...also i was thinkin of installin the gp1300r exit nozzle with a turnin nozzle awell...can they work?

  4. #4
    Quote Originally Posted by fastkaz View Post
    i look carefully today and in my stock intake grate one piece of it is broken...can that cause the prop to spin out...also i was thinkin of installin the gp1300r exit nozzle with a turnin nozzle awell...can they work?
    I think you will be able to find out if that is the problem pretty quick. Since me and probably everyone else on the forum will tell you to replace that intake grate if it is broken. Stock grates are bad enough, but if its stock and broken its an accident waiting to happen. Just looking out for ya.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Props Swap out
    By Big George in forum 4-Tec Performance
    Replies: 5
    Last Post: 09-10-2012, 11:33 PM
  2. prop spins out of the hole,help!
    By jamiej in forum 4-Tec Performance
    Replies: 15
    Last Post: 11-24-2008, 09:54 AM
  3. Finally got to test out my mods with the new prop.
    By Pinoy in forum 4-Tec Performance
    Replies: 7
    Last Post: 03-07-2008, 11:40 AM
  4. Help a [turbo] RXP brother out with nozzle/prop rpm questions.
    By engineermike in forum Yamaha PWC Performance (2-stroke)
    Replies: 3
    Last Post: 02-24-2008, 02:30 AM
  5. ?how to change out Prop
    By bigrich007 in forum 4-Tec Performance
    Replies: 1
    Last Post: 05-03-2007, 09:59 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •