Results 1 to 9 of 9
  1. #1

    Join Date
    Jul 2014
    Location
    New Zealand
    Posts
    13
    +1
    1

    310x se where do these bolts go?

    Hi,
    After a few months of waiting the ski that I imported from the States has arrived. I have put the handle bar cover, latch and screen on. I am left with 2 x 6mm bolts and 2 x 6mm allen head bolts. Both have a green thread locking compound on them. Any ideas where these go??

    Thanks


  2. #2
    nicjak's Avatar
    Join Date
    Mar 2008
    Location
    Warragul, Downunder
    Posts
    7,794
    +1
    625
    on the steering pad holder bracket, and bonnet top lip.

  3. #3

    Join Date
    Jul 2014
    Location
    New Zealand
    Posts
    13
    +1
    1
    No already fitted the screws for those. The the steering pad holder were 5mm and the bonnet top lip were self tapping style screws.The ones left are 6mm threaded bolts and capscrews.?

  4. #4

    Join Date
    Jul 2014
    Location
    New Zealand
    Posts
    13
    +1
    1
    Sorry your right I hadnt bolted the steering pad holder on. That must mean that the two 10mm headed bolts go on the bonnet top lip somewhere.
    Thanks

  5. #5

    Join Date
    Jul 2014
    Location
    New Zealand
    Posts
    13
    +1
    1
    Where do you mean bonnet top lip?

    Thanks

  6. #6
    nicjak's Avatar
    Join Date
    Mar 2008
    Location
    Warragul, Downunder
    Posts
    7,794
    +1
    625
    the allen heads actually go in the bottom of the ride plate where it was bolted to the crate

  7. #7

    Join Date
    Jul 2014
    Location
    New Zealand
    Posts
    13
    +1
    1
    I had been working on it while it was still on the crate. Lifted it up with the forklift and now I can see what you mean.

    Thanks

  8. #8
    Thanks guys, I also imported a 310X SE from the US but to the UK. We have no dealer networks as such any more and Kawasaki have all but abandoned us to Yamaha and Seadoo........... 310R and LX are available in mainland Europe but not the SE model.
    Anyway I would not have thought to put the two allen key bolts into the ride plate bolt holes that held the ski in the crate.
    Thanks!

  9. +1 by:


  10. #9
    I you have the service manual look up the handle bar cover and look for usages of the bolts. If you don't have the service manual then Iyou should purchase it.
    Quote Originally Posted by Sliding View Post
    Hi,
    After a few months of waiting the ski that I imported from the States has arrived. I have put the handle bar cover, latch and screen on. I am left with 2 x 6mm bolts and 2 x 6mm allen head bolts. Both have a green thread locking compound on them. Any ideas where these go??

    Thanks

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. GP1200r... Carb re-assembly: How do these springs go back on for the throttle bar?
    By toddnbrown in forum Yamaha PWC Performance (2-stroke)
    Replies: 4
    Last Post: 10-17-2012, 12:19 PM
  2. Where do these bolts go?
    By toyterrific in forum Yamaha PWC Performance (2-stroke)
    Replies: 11
    Last Post: 10-24-2010, 09:41 AM
  3. Where do the hoses go?? sl900
    By stubburnjdh in forum Polaris Open Discussion
    Replies: 2
    Last Post: 07-19-2009, 05:53 PM
  4. Where do these brackets go?
    By marcporter in forum Sea Doo Open Discussion
    Replies: 3
    Last Post: 07-12-2008, 07:24 AM
  5. Where did these bolts come from??
    By Muddy River in forum 4-Tec Performance
    Replies: 6
    Last Post: 02-18-2008, 01:33 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •