Results 1 to 3 of 3
  1. #1

    Bilge and Stop swtiches not working

    Hi all-
    I'm new to the forum and just purchased my first pwc...a 2004 polaris virage with 50 hours on it. I've owned dirtbikes my whole life and have always done most of the maintenance, so I'm not completely helpless when it comes to fixing mechanical issues, but I'm still trying to learn my way around the pwc engines and nuances.

    So I've taken my ski out a few times and it runs great. The only issues are somewhat minor and don't prevent me from taking her out for a spin.

    1. The bilge pump does not come on when i press the button.

    2. The ski starts up no problem using the stop/start switch, but the switch doesn't work when I want to shut the motor off....i have to pull the lanyard which does shut it off.

    Any suggestions on what the issue may be or how to diagnose? Are these problems related?

    Thanks in advance for any help.

  2. #2
    Myself's Avatar
    Join Date
    May 2007
    North Central Arkansas
    I've seen a couple of the newer ones not shut off but usually after a bit of run time on the water they suddenly start working??? You could have a blown fuse in the e-box for the bilge.

  3. #3
    ben01251979's Avatar
    Join Date
    Jun 2013
    Portage, WI
    I had the same problem with my ski and it was the lr503 ( I believe that was the part number ) that was bad and it fixed both my builg pump and start/stop switch

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. speedo and hour metre not working on 07 rxp
    By Styler690 in forum 4-Tec Performance
    Replies: 0
    Last Post: 12-27-2011, 05:49 PM
  2. 1996 Polaris 700 SL - Fuel Gauge and Trim Gauge not working
    By thecompletist in forum Polaris How To & FAQs
    Replies: 0
    Last Post: 08-01-2011, 11:46 AM
  3. Bypass and Washer mod not working
    By HammerDown in forum Kawasaki PWC Performance (4-stroke)
    Replies: 5
    Last Post: 07-08-2011, 10:10 PM
  4. bilge, trim, and gas gauge not working!!
    By sebas54 in forum Polaris How To & FAQs
    Replies: 8
    Last Post: 05-08-2009, 09:07 PM
  5. Pro cdi and 780 will not work on 94 650..
    By Rodneyae in forum Polaris Open Discussion
    Replies: 25
    Last Post: 05-16-2007, 07:48 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts