Thread: AEM Gauge repair
10-09-2014, 05:48 PM #1
AEM Gauge repair
So FYI for anyone who may have the same issue.
Fogging of display and erratic display from saltwater moisture intrusion on gauge.
I spoke to the AEM and they advised me on how to dissemble the gauges.
Unscrew the bezel and turn the gauge face side down. Tap the gauge assembly on a flat surface until the upper circuit board pops out. There is a 2 layer circuit in this pod. The upper board is pinned to the lower board. The main one I didn't bother pulling out I just cleaned it while its in the case.
When done reinstall and hook back up.
They said to use pc board cleaner from radio shack or distilled water will work to.
BTW yes popping the board it will void the warranty but saltwater use voids it anyway.
10-10-2014, 05:25 AM #2
- Join Date
- Jan 2008
- Currituck, North Carolina, United States
I've done that to my AEM boost gauge
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By ultramaxracing05 in forum 4-Tec PerformanceReplies: 2Last Post: 05-03-2015, 11:26 PM
By scittb in forum Yamaha PWC Performance (4-stroke)Replies: 29Last Post: 05-30-2013, 05:28 PM
By Slow 91 in forum Sea Doo ClassifiedsReplies: 1Last Post: 09-06-2011, 04:26 PM
By bksbigboy69 in forum 4-Tec PerformanceReplies: 14Last Post: 08-19-2011, 03:24 PM
By Byteme in forum Yamaha PWC Performance (2-stroke)Replies: 12Last Post: 05-25-2007, 09:46 AM