Page 1 of 4 1 2 3 ... LastLast
Results 1 to 10 of 32
  1. #1

    Join Date
    Aug 2006
    Location
    Homer Glen Il.
    Posts
    8,704
    +1
    109

    Matrix For Sale !!!!

    I have a stock 04 Matrix for sale it has less then 20hrs on it , the hull needs a real good buffing . It does have vforce reeds and a Watcon head cover .
    $4000.00
    Pm Me if interested

    Might need paint but I think it would buff out ,top is red bottom white i'll post pics tomorrow ,I also have red insert for the side rails and a new set of black hydro turf for it and a hydro turf seat cover too

    Also I have riflebore carbs , Polaris race intakes , ported cylinders done by Dave Delaughter and more I would make a good deal on if you want it .

    It also has the standard 24-3/8 driveshaft in it I had heard this was the setup Polaris was going to go back with in the MSX's in 05


  2. #2
    PWC Addict lilman573's Avatar
    Join Date
    Feb 2010
    Location
    Central NJ
    Posts
    2,947
    +1
    207
    Stock, 04 Matrix?! Is there such a thing?!

    Free bump and good luck with the sale.

  3. #3
    Click avatar for tech links/info, donation request K447's Avatar
    Join Date
    Jul 2007
    Location
    near Toronto, Canada
    Posts
    36,599
    +1
    1,276
    Quote Originally Posted by 785 lugs View Post
    I have a stock 2004 Matrix ...

    It also has the standard 24-3/8 driveshaft in it I had heard this was the setup Polaris was going to go back with in the MSX's in 2005
    There was some other driveshaft length used in other Matrix versions?

  4. #4

    Join Date
    Aug 2006
    Location
    Homer Glen Il.
    Posts
    8,704
    +1
    109
    Quote Originally Posted by K447 View Post
    Quote Originally Posted by 785 lugs View Post
    I have a stock 2004 Matrix ...

    It also has the standard 24-3/8 driveshaft in it I had heard this was the setup Polaris was going to go back with in the MSX's in 2005
    There was some other driveshaft length used in other Matrix versions?
    this is a regular shaft like most other Polaris ski's use with a regular thru hull bearing not the typical msx bearing

  5. #5
    Click avatar for tech links/info, donation request K447's Avatar
    Join Date
    Jul 2007
    Location
    near Toronto, Canada
    Posts
    36,599
    +1
    1,276
    Quote Originally Posted by 785 lugs View Post
    Quote Originally Posted by K447 View Post
    Quote Originally Posted by 785 lugs View Post
    I have a stock 2004 Matrix ...

    It also has the standard 24-3/8 driveshaft in it I had heard this was the setup Polaris was going to go back with in the MSX's in 2005
    There was some other driveshaft length used in other Matrix versions?
    this is a regular shaft like most other Polaris ski's use with a regular thru hull bearing not the typical msx bearing
    What does the regular through-hull mount to in this MSX?

    I wouldn't mind switching to a regular through-hull and driveshaft on my stock MSX 140.

  6. #6
    PWC Addict lilman573's Avatar
    Join Date
    Feb 2010
    Location
    Central NJ
    Posts
    2,947
    +1
    207
    Quote Originally Posted by K447 View Post
    Quote Originally Posted by 785 lugs View Post
    Quote Originally Posted by K447 View Post
    Quote Originally Posted by 785 lugs View Post
    I have a stock 2004 Matrix ...

    It also has the standard 24-3/8 driveshaft in it I had heard this was the setup Polaris was going to go back with in the MSX's in 2005
    There was some other driveshaft length used in other Matrix versions?
    this is a regular shaft like most other Polaris ski's use with a regular thru hull bearing not the typical msx bearing
    What does the regular through-hull mount to in this MSX?

    I wouldn't mind switching to a regular through-hull and driveshaft on my stock MSX 140.
    There has to be an adapter plate similar to kosh's. Unless they replaced the part that attaches to the tunnel, which I doubt.

    It actually shouldn't be hard to make at all.
    Last edited by lilman573; 10-19-2014 at 07:53 AM.

  7. #7

    Join Date
    Aug 2006
    Location
    Homer Glen Il.
    Posts
    8,704
    +1
    109
    Quote Originally Posted by lilman573 View Post
    Quote Originally Posted by K447 View Post
    Quote Originally Posted by 785 lugs View Post

    this is a regular shaft like most other Polaris ski's use with a regular thru hull bearing not the typical msx bearing
    What does the regular through-hull mount to in this MSX?

    I wouldn't mind switching to a regular through-hull and driveshaft on my stock MSX 140.
    There has to be an adapter plate similar to kosh's. Unless they replaced the part that attaches to the tunn, which I doubt.

    It actually shouldn't be hard to make at all.
    no adapter it's a piece glued into the tunnel , i'll get pics this winter of it if no one buys it . I'm going to remove a pipe to look at it better and repaint it black too

  8. #8
    PWC Addict lilman573's Avatar
    Join Date
    Feb 2010
    Location
    Central NJ
    Posts
    2,947
    +1
    207
    Quote Originally Posted by 785 lugs View Post
    Quote Originally Posted by lilman573 View Post
    Quote Originally Posted by K447 View Post
    Quote Originally Posted by 785 lugs View Post

    this is a regular shaft like most other Polaris ski's use with a regular thru hull bearing not the typical msx bearing
    What does the regular through-hull mount to in this MSX?

    I wouldn't mind switching to a regular through-hull and driveshaft on my stock MSX 140.
    There has to be an adapter plate similar to kosh's. Unless they replaced the part that attaches to the tunn, which I doubt.

    It actually shouldn't be hard to make at all.
    no adapter it's a piece glued into the tunnel , i'll get pics this winter of it if no one buys it . I'm going to remove a pipe to look at it better and repaint it black too
    Wow!!! That means its like Spencer's! I didn't think they would swap that entire setup out but I guess they wanted less points for failure.

    Either way, I'd think k447 would want to retrofit the current tunnel setup no?

  9. #9
    Banned User
    Join Date
    Jun 2010
    Location
    Milwaukee WI
    Posts
    16,708
    +1
    1,324
    So are you saying that if you were to pull the MSX seal housing out that a stock 24 3/8 driveshaft would fit on the MSX? If so, it would be a real easy mod to do with an adapter that was bolted in place of the MSX bearing housing.

  10. #10

    Join Date
    Aug 2006
    Location
    Homer Glen Il.
    Posts
    8,704
    +1
    109
    Quote Originally Posted by BryanP View Post
    So are you saying that if you were to pull the MSX seal housing out that a stock 24 3/8 driveshaft would fit on the MSX? If so, it would be a real easy mod to do with an adapter that was bolted in place of the MSX bearing housing.
    yes change the shaft and coupler and adapt a thru hull and it will work

Page 1 of 4 1 2 3 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. FS Matrix For Sale $4000.00
    By 785 lugs in forum Polaris Skis
    Replies: 2
    Last Post: 09-11-2015, 01:32 PM
  2. Check out this matrix for sale
    By 750sl in forum Polaris Open Discussion
    Replies: 6
    Last Post: 05-26-2010, 11:31 AM
  3. '04 Matrix for sale in NZ
    By pirate33 in forum MSX/Matrix
    Replies: 28
    Last Post: 04-21-2010, 08:40 AM
  4. Hate to do it 03 Matrix for Sale
    By mdeps in forum Polaris Skis
    Replies: 11
    Last Post: 04-09-2009, 05:24 PM
  5. Matrix for sale.
    By suparoo in forum Polaris Skis
    Replies: 14
    Last Post: 07-29-2008, 12:05 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •