Results 1 to 9 of 9
  1. #1

    Join Date
    Feb 2007
    Location
    Right in front of you!
    Posts
    19

    GPR1200 carb settings

    Does anyone know what the factory settings are on the GPR1200 from the factory. Trying to put a boat back to stock and there is no room to adjust these after you put your exhaust back together. I really dont want to guess.


  2. #2
    spdracr's Avatar
    Join Date
    Sep 2005
    Location
    Fort Lauderdale
    Posts
    422
    +1
    2
    Have you removed the tamper caps yet?

  3. #3
    Yes,,im in the same page as you, my GP1200R is already removed the temper, and it has low speed needle n high speed needle that is ready to be adjusted.
    does anyone know the standrad carb setting on GP1200R

    I donno how many version of the ski (usa, Europe, Asia?) but mine is in Asia and it has the needle Adjustment from Brand New, and it has not been adjusted properly.Ski is stock.
    thx,,

  4. #4
    Moderator RX951's Avatar
    Join Date
    Apr 2005
    Location
    League City, Texas
    Posts
    16,066
    +1
    23
    If the carbs have been untouched, the adjustments for the low and high speed adjusters have brass tamper caps on them.

    Here is a how-to on removing the tamper caps.

    http://www.cajundude.com/carbrejet.htm

    Read this thread for factory settings
    http://rivaforums.com/eve/forums/a/t...514#6416060514

    RIVA; factory carb setting search result
    http://rivaforums.com/eve/forums?a=s...authorOID=&p=1
    Last edited by RX951; 04-09-2007 at 10:22 PM.

  5. #5

    Join Date
    Feb 2007
    Location
    Right in front of you!
    Posts
    19
    yes, the tamper caps have been removed. This was a highly modified ski. I just want to get it back to stack and sell it. There is no info out there that I can find on what settings where before all of the parts where installed. Just wondered if someone payed attention to this little detail, or has a set that they never have touched to look at.

  6. #6
    Moderator OsideBill's Avatar
    Join Date
    Mar 2006
    Location
    United States
    Posts
    11,875
    +1
    30
    I will be pulling the Tamper evident caps off a set in the next day or two I will post the settings once I do this.

  7. #7

    Join Date
    Jul 2005
    Location
    Central North Carolina
    Posts
    3,847
    +1
    528

    Oem factory stock settings

    These are the oem factory stock settings for a 1200 gpr you will find when you remove the tamper caps all low speed adj. 1-1/8 to 1-1/4 out from seated High speed adj. 1-1/8 to 1-1/4 out from seated this information was in a old riva technical information sheet I have on file

  8. #8

    Join Date
    Feb 2007
    Location
    Right in front of you!
    Posts
    19
    Thanks to all.... You saved lots of time.

  9. #9
    Moderator RX951's Avatar
    Join Date
    Apr 2005
    Location
    League City, Texas
    Posts
    16,066
    +1
    23

    GP1200R Factory Carb Settings

    Quote Originally Posted by 2fast4u View Post
    These are the oem factory stock settings for a 1200 gpr you will find when you remove the tamper caps all low speed adj. 1-1/8 to 1-1/4 out from seated High speed adj. 1-1/8 to 1-1/4 out from seated this information was in a old riva technical information sheet I have on file

    Very Good information for archiving ! Thanks Tommy

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. WTB - Parts Wanted Set of GPR1200 carbs
    By kpracing12 in forum Yamaha Classifieds
    Replies: 1
    Last Post: 02-12-2014, 04:03 PM
  2. 40 hp merc 4 stroke carb setting
    By gerhand44 in forum Polaris How To & FAQs
    Replies: 8
    Last Post: 01-13-2007, 01:53 AM
  3. Melted pistons - need carb setting advice
    By Byteme in forum Yamaha PWC Performance (2-stroke)
    Replies: 27
    Last Post: 12-29-2006, 01:06 AM
  4. need carb settings
    By xyzyx00 in forum Yamaha PWC Performance (2-stroke)
    Replies: 4
    Last Post: 05-26-2006, 11:41 PM
  5. Novi 48's Carb set up -- (help)
    By idizzy in forum Yamaha PWC Performance (2-stroke)
    Replies: 5
    Last Post: 02-13-2006, 10:22 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •