Thread: Solas 160 4 blade prop
10-27-2014, 10:26 PM #1
Solas 160 4 blade prop
This is a one off Seadoo Solas 4 blade prop converted by Scat to work with a FZR-SHO drive shaft. I have about
$650 in this prop. Its pitched to a true 22/24. Its a true 160mm prop. But it will turn about 300 rpms more than the Solas 13/20 160 prop. So the pitch
sounds big, but do to a 4 blade design it doesn't load the motor down nearly as bad. Its also faster on top speed than that prop,tested back to back on my conversion.
Last edited by YudLuz2; 11-05-2014 at 09:30 PM.
10-28-2014, 08:33 AM #2
- Join Date
- Jan 2008
- Currituck, North Carolina, United States
What boost level is this ideal for?
10-28-2014, 08:59 AM #3
It works good on a 16 to a 20 pound wheel. The bigger wheel you use the higher rpm. So it really depends on your rpm goal. I was at 9000 rpms at 19 plus so I would guess using a good 16 pound wheel could put you 8500 to 8700. Depending on weather conditions.
10-28-2014, 10:28 PM #4
Wht was the speed at 9k?
10-29-2014, 08:15 AM #5
10-29-2014, 12:30 PM #6
great deal, I wonder how this would work in my conversion. I seriously need to ride and test my gprsho first tho...
10-29-2014, 07:47 PM #7
10-29-2014, 08:54 PM #8
12-14-2014, 10:07 PM #9
4 blade for Sale again $200 going a different route.
87.7 with 83mm nozzle 8840 rpm
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By 2fast4u in forum Yamaha ClassifiedsReplies: 3Last Post: 07-19-2014, 11:28 AM
By Otacon132 in forum Sea Doo ClassifiedsReplies: 1Last Post: 07-21-2009, 09:41 PM
By Lurker in forum 4-Tec PerformanceReplies: 14Last Post: 03-09-2007, 03:47 PM
By R1SideWayz in forum Yamaha PWC Performance (2-stroke)Replies: 14Last Post: 01-06-2007, 09:44 PM
By 05RXPnoob in forum 4-Tec PerformanceReplies: 15Last Post: 12-17-2005, 07:34 AM