Results 1 to 4 of 4
  1. #1

    New member saying hi with a question

    Hey everyone, I picked up a 2000 xl ltd as a project but have a question about greasing the pump.
    In the services manual it says to use marine grease and to be careful not to overfill and damage the feed tube, which is fine but how much do I fill it up, how do I know when it's full?

  2. #2

    Join Date
    Aug 2006
    Give it three or four pumps. If you are careful you can feel it get a bit harder to pump. Stop.

  3. #3
    Ok, thanks!!

  4. #4
    If your talking about the intermediate housing.......pump slow. Also since your new just fyi, that grease is NOT for lubrication of the bearing its to maintain a water seal between seals in the housing.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. New Member saying hi and a couple questions.
    By Mikenj in forum PWC Fishing
    Replies: 7
    Last Post: 06-13-2015, 01:02 AM
  2. New guy saying hi!
    By SlowStang305 in forum Open Discussion
    Replies: 12
    Last Post: 06-15-2008, 09:37 PM
  3. New member/RXP owner with a few questions
    By ckybltz in forum Sea Doo Open Discussion
    Replies: 11
    Last Post: 07-17-2007, 10:10 AM
  4. New member says thanks!
    By RXP244 in forum 4-Tec Performance
    Replies: 6
    Last Post: 05-11-2007, 09:31 PM
  5. new member saying hey
    By racerrob333 in forum Sea Doo Open Discussion
    Replies: 8
    Last Post: 05-04-2005, 03:45 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts